So if I'm understanding correctly, the current plan is:<br><br>* Run 1.25" conduit from the Front panel back the kitchen, and run cable through it<br>* Run 1.25" conduit from the Front panel to the shop, and run cable through it<br>

* Install a sub-panel at the kitchen<br>* Install a sub-panel in the shop<br>* Make local runs & outlets in the shop and in the kitchen<br>* Put the Front panel back together<br>* Trace out and label the runs from the Front panel.<br>

<br>This is, I understand, a completely simplistic writeup of a set of complex tasks, but I want to get a handle on what needs to be done.<br><br>If you look at the current, All New! taped out layout of the walls, it puts the shop very close by the Rear panel, which would make for an easy run.<br>
<br>Do we really need 3-phase?  I understand that it's there in the front panel, and we'd be silly to rip it out, but is this something we could leave as a future possibility rather than something we're doing now?<br>
<br>I'll be in the space tomorrow and Sunday; I may be working on walls with Zed or I may be free to help out with Electrical, if either of you are around.<br><br>--S<br><br>PS, I think we should name our panels after Chinese deistic entities.<br>
<br><div class="gmail_quote">On Thu, Aug 27, 2009 at 1:26 PM, neil maclean <span dir="ltr"><<a href="mailto:neil@warmcove.org" target="_blank">neil@warmcove.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">I just got off the phone with Jim and we made some decisions that I really like.<br>
<br>
I oing to bring a rolling scaffold tonight and would like help getting it up the stairs and set up in the space. The scaffold can help us trace circuits and later to install pipe and wire.<br>
<br>
I would like to create a plan tonight. If we finish the circuit tracing, we can make decisions about how to re-purpose them, take them out, or use them as they are.<br>
<br>
It would be great if one to three people could work with me on Friday, (Jim is going to get the materials in the morning and then come back later in the afternoon.)<br>
I could use help most of the day doing stuff like carrying things around, handing it up the scaffold, rolling the scaffold, opening boxes, tracing circuits, pulling wires, and fastening pipe. If anyone wants to, I could also share some basics about how to bend pipe, (its not really that hard.)<br>


<br>
I would like to start early Friday, like 8 or 9 in the morning. My goal is to get the biggest run, the one to the bathroom/laundry/kitchen finished and the one to the shop at least figured out and began.<br>
<br>
Neil<br>
<br>
<br>
<br>
Shannon Lee wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div><div></div><div>
Hey All,<br>
<br>
Tonight at 7:00, a bunch of people are getting together at 2169 to admire the floor, and to give a go at finishing off the cable tracing -- we need to figure out where all the breakers go.<br>
<br>
The front box is all taken apart, and we won't be able to use the breakers themselves to trace out -- so bring tracing equipment!  I know I've got a tone generator and tracer kit, it's not clear to me whether it's suitable for tracing AC as well as low-voltage cable;  Jim recommends a battery and a voltmeter -- we have a couple of voltmeters, so if you have batteries suitable for this sort of adventure, be sure to bring them along.<br>


<br>
See you all there,<br>
<br>
--S<br>
<br>
-- <br>
Shannon Lee<br>
(503) 539-3700<br>
<br>
"Any sufficiently analyzed magic is indistinguishable from science."<br></div></div>
------------------------------------------------------------------------<div><br>
<br>
_______________________________________________<br>
Build mailing list<br>
<a href="mailto:Build@lists.noisebridge.net" target="_blank">Build@lists.noisebridge.net</a><br>
<a href="https://www.noisebridge.net/mailman/listinfo/build" target="_blank">https://www.noisebridge.net/mailman/listinfo/build</a><br>
  <br>
</div></blockquote>
<br>
-- <br>
They further concluded that at least 8 detainees in US custody were tortured to death. Steven Miles, reporting in this journal, put the number of deaths due to torture at 17, with 11 cases occurring in Iraq and 6 occurring in Afghanistan.[8] <<a href="http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1868355#R8" target="_blank">http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1868355#R8</a>> Many of these deaths involved torture or abuse related to harsh interrogations of the detainees by US personnel.<br>


<br>
from: Public Medical Records Central: a free library of Life Science Journals<br>
<a href="http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1868355" target="_blank">http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1868355</a><br><font color="#888888">
<br>
-- <br>
"The crimes of the US throughout the world have been systematic, constant, clinical, remorseless, and fully documented but nobody talks about them"<br>
Harold Pinter, who died on Dec. 25th, 2008<br>
<br>
</font></blockquote></div><br><br clear="all"><br>-- <br>Shannon Lee<br>(503) 539-3700<br><br>"Any sufficiently analyzed magic is indistinguishable from science."<br>