[Fab] lazzor + linen = success
rachel lyra hospodar
rachel at mediumreality.com
Wed Jun 8 07:11:04 UTC 2011
oh it was you that made that! cool! someone found it and showed it to
me and i was wondering!
I have had lots of success in the past in etching images onto:
-twill weave fabric (fabric that has been woven in a different way that
has that diagonal appearance, like how denim is made)
-velvet/velour
-ultrasuede/fake suede
-leather (works best when interfaced)
i have some examples laying around somewhere of different etchings onto
fabric, i will bring them in to show people (although the settings won't
transfer).
also i found that the fiber content of the fabric is a big variable in
how it comes out - it kept throwing my ability to predict results till i
learned to pay attention to it.
R.
On 6/7/2011 11:53 PM, Casey Callendrello wrote:
> Thanks to some help from rayc and miloh, I was able to successfully
> engrave a few things on linen. My first attempt was at 5.5 mA or so, but
> Miloh pointed out just how weak the fibers had become. Further attempts
> were at ~4.5 mA, 70% speed, 1 pass (raster). These seemed to be pretty
> strong. Lesson learned: make sure you strength test in *both*
> directions. The weft was basically undamaged, but the warp was very,
> very weak.
>
> http://caseyc.net/lazzor/towel1.jpg (4.5 mA)
> http://caseyc.net/lazzor/towel2.jpg (4 mA, noticeably weaker)
>
> One of these is now in the kitchen, having joined the noisebridge towelpool.
>
> --Casey
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
More information about the Fab
mailing list