The one we have is a chunky knit that can be set up to be a double knit machine. It's labeled as a Singer LK150 (i think). As far as I can tell, It doesn't have the computer punch on it. Nor does it have an instruction manual and I couldn't find one on the internet that matched this particular machine.<div>
I think the two opinions I would add in regards to buying more machines for Noise Bridge is that if we get more, we need to make room for them to have their own space.  One machine takes up about 6 feet of linear space and it takes around 30 minutes to get one set up. </div>
<div>Second, it would be good to get instruction manuals for people to read before they try to use them as both a flat bed and double bed. They don't break easily if you know what you're doing, but getting one tangled will inevitably bend and break hooks. I have a book of hand written instructions from my knitting machine class, but it's based on a different machine and full of hand drawings that might not be easy for others to interpret.</div>
<div>We also don't have any yarn, with the acception of the two small spools I brought in, and Scrap doesn't haven any at this point either. Ideally, we would have cones and a cone winder so people can spool their own yarn.</div>
<div>blah blah blah</div><div>calli</div><div><br></div><div><br><div class="gmail_quote">On Wed, Feb 1, 2012 at 7:15 PM, miloh <span dir="ltr"><<a href="mailto:froggytoad@gmail.com">froggytoad@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">On Thu, Feb 2, 2012 at 4:00 AM, Christina Olson <<a href="mailto:daravinne@gmail.com">daravinne@gmail.com</a>> wrote:<br>

> i would throw down for that electroknit machine.  i was eyeing that up at 28c3.<br>
><br>
<br>
</div>I keep looking out for KH-930 and KH-940 machines, and this is the<br>
best deal I have seen.....<br>
<br>
they normally end up for about $1k on ebay.<br>
<br>
--rma<br>
</blockquote></div><br></div>