Ethernet eth0: MAC address 00:18:0a:01:76:04 IP: 192.168.84.1/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.84.9 RedBoot(tm) bootstrap and debug environment [ROMRAM] Release, version V1.04 - built 12:24:00, Apr 17 2006 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: Meraki Mini RAM: 0x80000000-0x82000000, [0x8003d110-0x80fe1000] available FLASH: 0xa8000000 - 0xa87e0000, 128 blocks of 0x00010000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> check_mac Lan Mac address is : 00:18:0a:01:76:04 Wlan Mac address is : 00:18:0a:01:76:04 Serial Number is : d4a-139-8e2 RedBoot> load art_ap51.elf Using default protocol (TFTP) __udp_sendto: Can't find address of server Can't load 'art_ap51.elf': some sort of network error RedBoot> go No entry point known - aborted RedBoot> fis load stage2 RedBoot> exec Now booting linux kernel: Base address 0x80030000 Entry 0x80100000 Cmdline : starting stage2 reading flash at 0xa8150000 - 0xa8484f94.....................done Calculating CRC... 0xc173ebaa - matches decompressing....................done starting linux [ 0.000] Linux version 2.6.16.16-meraki-mini (maxp@tondo) (gcc version 4.2.3 ) #4 Thu Jul 30 21:48:39 PDT 2009 [ 0.000] CPU revision is: 00019064 [ 0.000] Determined physical RAM map: [ 0.000] memory: 02000000 @ 00000000 (usable) [ 0.000] Built 1 zonelists [ 0.000] Kernel command line: [ 0.000] Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes. [ 0.000] Primary data cache 16kB, 4-way, linesize 16 bytes. [ 0.000] Synthesized TLB refill handler (20 instructions). [ 0.000] Synthesized TLB load handler fastpath (32 instructions). [ 0.000] Synthesized TLB store handler fastpath (32 instructions). [ 0.000] Synthesized TLB modify handler fastpath (31 instructions). [ 0.000] PID hash table entries: 256 (order: 8, 4096 bytes) [ 0.000] Using 92.000 MHz high precision timer. [ 0.002] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.004] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.011] Memory: 19448k/32768k available (1749k kernel code, 13304k reserved , 362k data, 10496k init, 0k highmem) [ 0.031] Mount-cache hash table entries: 512 [ 0.034] Checking for 'wait' instruction... available. [ 0.037] unpacking initramfs....done in 0.779000 [ 0.822] NET: Registered protocol family 16 [ 0.881] Algorithmics/MIPS FPU Emulator v1.5 [ 1.867] JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. [ 1.868] Initializing Cryptographic API [ 1.869] io scheduler noop registered (default) [ 2.124] watchdog hb: 90 ISR: 0x21 IMR: 0x8 WD : 0x8c92098a WDC: 0x0 [ 2.129] ar2315_wdt_init using heartbeat 90 s cycles 3600000000 [ 2.130] watchdog hb: 90 ISR: 0x21 IMR: 0x88 WD : 0xd68d0b70 WDC: 0x0 [ 2.140] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing di sabled [ 2.225] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A [ 2.355] phyID=0xffffffff [ 2.356] Found RT8201CP. phyID=0x8201. [ 2.419] eth0: Dropping NETIF_F_SG since no checksum feature. [ 2.505] eth0: Atheros AR2313: 00:18:0a:01:76:04, irq 4 [ 2.591] tun: Universal TUN/TAP device driver, 1.6 [ 2.592] tun: (C) 1999-2004 Max Krasnyansky [ 2.678] MTD driver for SPI flash. [ 2.679] spiflash: Probing for Serial flash ... [ 2.680] spiflash: Found SPI serial Flash. [ 2.681] 8388608: size [ 2.682] RedBoot partition parsing not available [ 2.683] Creating 7 MTD partitions on "spiflash": [ 2.684] 0x00000000-0x00030000 : "RedBoot" [ 2.940] 0x00030000-0x00050000 : "stage2" [ 3.195] 0x00050000-0x00150000 : "/storage" [ 3.438] 0x00150000-0x00490000 : "part1" [ 3.693] 0x00490000-0x007d0000 : "part2" [ 3.948] 0x007d0000-0x007e0000 : "redboot config" [ 4.191] 0x007e0000-0x00800000 : "board config" [ 4.702] i2c /dev entries driver [ 4.873] i2c-dev: adapter [AR531x GPIO I2C] registered as minor 0 [ 4.958] NET: Registered protocol family 2 [ 4.987] IP route cache hash table entries: 512 (order: -1, 2048 bytes) [ 4.990] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 4.991] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) [ 4.992] TCP: Hash tables configured (established 2048 bind 2048) [ 4.993] TCP reno registered [ 4.994] TCP bic registered [ 4.995] NET: Registered protocol family 1 [ 4.996] NET: Registered protocol family 17 [ 5.005] Freeing unused kernel memory: 10496k freed init started: BusyBox v1.1.0 (2009.06.17-22:12+0000) multi-call binary Please press Enter to activate this console. [ 11.629] module load for dummy load 0.079000 init 0.085000 total 0.164000 init-boot: boot 256 build 11-36825 board ar531x mac 00:18:0A:01:76:04 [ 17.773] ar2315_wdt: starting watchdog w/timeout 90 seconds [ 17.774] watchdog hb: 90 ISR: 0x20 IMR: 0x89 WD : 0xd690d159 WDC: 0x0 [ 17.944] ath_hal: module license 'Proprietary' taints kernel. [ 18.047] ath_hal: 0.9.17.1 (AR5212, AR5312, RF5112, RF2316, RF2317, TX_DESC_ SWAP) [ 18.053] module load for ath_hal load 0.128000 init 0.006000 total 0.134000 [ 18.390] wlan: 0.8.4.2 (svn 35557) [ 18.391] module load for wlan load 0.231000 init 0.001000 total 0.232000 [ 18.598] ath_rate_sample: 1.2 (svn 35557) [ 18.600] module load for ath_rate_sample load 0.102000 init 0.002000 total 0 .104000 [ 18.799] module load for proclikefs load 0.095000 init 0.000000 total 0.0950 00 [ 19.097] ath_ahb: 0.9.4.5 (svn 35557) [ 19.241] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 19.244] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18M bps 24Mbps 36Mbps 48Mbps 54Mbps [ 19.252] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 19.256] wifi0: mac 11.0 phy 4.8 radio 7.0 [ 19.258] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 19.259] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 19.260] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 19.261] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 19.262] wifi0: Use hw queue 8 for CAB traffic [ 19.263] wifi0: Use hw queue 9 for beacons [ 19.366] wifi0: Atheros 2315 WiSoC: mem=0xb0000000, irq=3 [ 19.367] module load for ath_ahb load 0.162000 init 0.270000 total 0.432000 [ 20.068] module load for merakiclick load 0.609000 init 0.004000 total 0.613 000 [ 20.121] click: starting router thread pid 437 (8192f6e0) [ 20.317] pca9534_detect: detected adapter at 0x38 [ 20.411] pca9534_detect: detected adapter at 0x70 [ 20.503] pca9534_detect: detected adapter at 0x73 [ 20.595] module load for pca9534 load 0.092000 init 0.352000 total 0.444000 [ 20.771] wlan: mac acl policy registered [ 20.772] module load for wlan_acl load 0.091000 init 0.001000 total 0.092000 [ 20.942] module load for wlan_ccmp load 0.095000 init 0.000000 total 0.09500 0 [ 21.114] module load for wlan_scan_ap load 0.099000 init 0.000000 total 0.09 9000 [ 21.291] module load for wlan_scan_sta load 0.103000 init 0.000000 total 0.1 04000 [ 21.461] module load for wlan_tkip load 0.097000 init 0.000000 total 0.09700 0 [ 21.625] module load for wlan_wep load 0.091000 init 0.000000 total 0.091000 [ 21.786] module load for wlan_xauth load 0.087000 init 0.000000 total 0.0870 00 !!!!! reading /var/log/last_scan_utilization.xml failed: No such file or directo ry BusyBox v1.1.0 (2009.06.17-22:12+0000) Built-in shell (ash) Enter 'help' for a list of built-in commands. Welcome to Meraki. Usage of this device is governed by Meraki's End User License Agreement, available at http://meraki.com/legal.