Thanks Casey, you saved the day.� I wasn't looking forward to dismantling my router.<br><br><div class="gmail_quote">On Tue, Jan 18, 2011 at 3:02 PM, Casey Callendrello <span dir="ltr"><<a href="mailto:c1@caseyc.net">c1@caseyc.net</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">

  
    
  
  <div bgcolor="#ffffff" text="#000000">
    Before you go JTAG crazy, you might have an easier option, which has
    saved me in the past. On booting, the WRT54G will wait 1 second on
    the most recently configured IP address for a TFTP PUT. On getting
    one, it will accept a TFTP transfer and load it in to firmware. If
    it doesn't receive one, it will attempt to boot via the traditional
    method. I've successfully de-bricked a router twice using this
    option.<br>
    <br>
    There is a more formal wiki introduction here:
    <a href="http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Installing%282f%29TFTP.html" target="_blank">http://oldwiki.openwrt.org/OpenWrtDocs%282f%29Installing%282f%29TFTP.html</a>,
    but all you need to do is (on a linux and macos box)<br>
    <br>
    1) Hardcode your wired interface to something like <a href="http://192.168.1.2/24" target="_blank">192.168.1.2/24</a><br>
    <br>
    2) Type the following<br>
    <br>
    tftp 192.168.1.1 <br>
    binary<br>
    rexmt 1<br>
    timeout 60<br>
    trace<br>
    <br>
    3) Type this command but don't hit enter<br>
    tftp> put $FILENAME.bin<br>
    <br>
    Hit enter and power up the router at about the same time; tftp will
    constantly re-try.� It might take a few tries to win the race, so
    don't get discouraged. I highly suggest using the vanilla Linksys
    firmware for this :-).<br>
    <br>
    Best of luck!<br>
    <br>
    --Casey<div><div></div><div class="h5"><br>
    <br>
    On 01/18/2011 11:30 AM, Robert Fletcher wrote:
    </div></div><blockquote type="cite"><div><div></div><div class="h5">Hey All,<br>
      <br>
      So I was trying to install DD-WRT on our router and managed to
      brick it.� This wasn't entirely unexpected as it was pretty much a
      last resort to try and get it working before buying a new one,
      which I did.� But I thought if anybody knew how to unbrick it I
      would love to learn.� From my cursory readings online it
      apparently requires opening it and doing something related to the
      acronym JTAG, but that's where things start to get fuzzy for me.�
      Does anybody have any experience with this and is willing to teach
      me?� It's a Linksys WRT54G.<br>
      <br>
      Thanks,<br>
      Robert<br>
      </div></div><pre><fieldset></fieldset>
_______________________________________________
Noisebridge-discuss mailing list
<div class="im"><a href="mailto:Noisebridge-discuss@lists.noisebridge.net" target="_blank">Noisebridge-discuss@lists.noisebridge.net</a>
<a href="https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss" target="_blank">https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss</a>
</div></pre>
    </blockquote>
    <br>
  </div>

</blockquote></div><br>