<p><br>
On Apr 9, 2012 5:02 PM, "Will Sargent" <<a href="mailto:will.sargent@gmail.com">will.sargent@gmail.com</a>> wrote:<br>
><br>
> Hi all,<br>
><br>
> So some of you may remember from the last meeting that Rayc moved the laser cutter from the backroom to the front room, and set up a venting system.  I vaguely remembered that a number of people were deeply paranoid about setting up the system to vent correctly, and so I asked around.<br>

><br>
> The threat model posed by the Laser Cutter and the reason it has to be vented is not "laser cutter gives off stinky fumes." <br>
><br>
> The threat model is "When used with the wrong substance, laser cutter fumes can potentially contain cyanide gas that can kill everyone in the room."  <br>
><br>
> <a href="http://www.atxhackerspace.org/wiki/Laser_Cutter_Materials">http://www.atxhackerspace.org/wiki/Laser_Cutter_Materials</a><br>
><br>
> I asked someone from AMT to come by the space to check it out, and the verdict is "I believe the current ventilation setup is fine for indoor plywoods, acrylic, and natural materials however it is most certainly not sufficient for anything toxic or chlorinated."  <br>

><br>
> So NO, IT IS NOT SAFE.<br>
><br>
> Will.<br>
></p>
<p>A list of suitable materials was established when the LC first arrived.  Nothing that gives off cyanide chlorine (or phosphene) has ever been acceptable to use.</p>
<p>Glad you're getting caught up.</p>
<p>-rma<br></p>