[Build] About those touch panels

[Dr. Jesus]

On Wed, Sep 9, 2009 at 2:49 PM, Andy Isaacson <adi at hexapodia.org> wrote:
> On Wed, Sep 09, 2009 at 11:25:19AM -0700, dpc wrote:
>> dpc <weasel at meer.net> writes:
>> > "Dr. Jesus" <j at hug.gs> writes:
>> >>> You can take downloading from our website as blow.
>> >>> www.inexio.co.kr
>> >>> Please visit our website and download from support section.
>> >
>> > what's model do you have? there seem to be a couple on their site, but i
>> > missed the datasheet section.
>>
>> nevermind, if you enable flash you can get to 'support'
>
> Please add the info to https://www.noisebridge.net/wiki/Inexio so that
> we can all see it.  Apparently there's some info in the jira somewhere,
> but it wants me to make an account before seeing the data. :(  I'd
> appreciate it if someone could extract any useful info from there and
> add it to the public wiki.

What you heard from me yesterday and repeated to Nils is actually more
than what's on the bug tracker at the moment, so if you decide to
knock this one out I think it's up to you whether you want to put it
on the wiki or not.

> Nils and I would love to work on the driver issues if necessary, it
> looks like a fun 1-evening project.
>
> Dr J - is there a machine we can use for kernel dev for this at 2169?
> Needs a 1GHz or faster processor, 1GB RAM, 40GB or more HDD, DB9 serial,
> VGA output, keyboard, and some USB ports.  x86 or amd64 is fine.  I can
> bring hardware if necessary but I'd prefer to use already present gear.
> I'll install Ubuntu 9.04 unless there's a really good alternative
> present.

That would be s1, 75.101.62.90 + 192.168.3.11, and it's already
running Ubuntu 9.04 and should have a panel hooked up.  I added a
radii account and SMSed you the password.  You should have full sudo.

The xinput driver should load via HAL if you fire up gdm.