[Build] Junk removal

Ben Kochie ben at nerp.net
Mon Jul 5 17:17:44 UTC 2010


Ok, I'll be over at 2169 around 1pm or so.  We can make a dump run on 
tuesday or wednesday afternoon.

-ben

  "UNIX is user-friendly, it's just picky about its friends."

On Mon, 5 Jul 2010, Ben Kochie wrote:

> All of what I cleaned up so far was stuff on the floor of the shop.
>
> 90% of it is scrap wood odds and ends.  We still have more than plenty
> scrap wood chunks.
>
> There were some metal bits on the floor.  Most of it looked like stuff
> that was leftover from tearing apart laptops and other consumer
> electronics.  Anything else I found that looked reasonably useful I
> stacked on the shelf.
>
> All of the refuse is either in the elevator lobby or in the trash bins in
> the shop.
>
> I'll target to be at NB this afternoon to go through the bins one more
> time and haul them out to a pickup truck.  My current plan is to get a zip
> truck, but if anyone has one we can use that'd be even better.
>
> -ben
>
>  "UNIX is user-friendly, it's just picky about its friends."
>
> On Mon, 5 Jul 2010, jim wrote:
>
>>
>>   genuine thanks for the way you're putting out!
>>
>>   seems to me as a general rule, given that one
>> person's junk is another's hacking supply, that
>> putting "junk" in a temporary buffer area for
>> review is a good idea.
>>
>>
>> On Mon, 2010-07-05 at 08:35 -0700, Ben Kochie wrote:
>>> I cleaned out a bunch of the junk in the shop.  Now all our trash bins are
>>> full.  Anyone know where is a good place to haul the stuff to?  I was
>>> thinking about getting a zip truck today and hauling it away.
>>>
>>> -ben
>>>
>>>   "UNIX is user-friendly, it's just picky about its friends."
>>> _______________________________________________
>>> Build mailing list
>>> Build at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/build
>>>
>>
>>
> _______________________________________________
> Build mailing list
> Build at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/build
>



More information about the Build mailing list