[Build] building the pony walls for the classroms and woodshop 25-26 Nov

[bandit]

> Kaya volunteered her truck for this, so I think we have that covered.
>
> Bandit,  I've got a small room over a bar in North Beach and would be
> willing to let you crash on the floor, bearing in mind that the floor's
> all
> there is really (don't have a couch).

That will work.

What is the start time on Friday?
I am going to take BART up.

I can be there in time to help unload the pickup.
I assume she has help on the load side, otherwise I can be down in time to
help do that.

I am also assuming this is going to be noonish or greater.
Hackers/Fannish/etc folks tend to be crack of noon folks (I am when
possible :^)
Of course, earlier would be OK (11am?...)

Thanks ... bandit

>
> --S
>
> On Wed, Nov 23, 2011 at 11:52 AM, Ben Kochie <ben at nerp.net> wrote:
>
>> That's awesome. I have morning plans this weekend, but otherwise plan to
>> work on this.
>>
>> I can reserve a pickup truck if we need materials delivery.
>> -ben
>>
>> bandit <bandit at cruzio.com> wrote:
>>>
>>> Greetings:
>>>
>>> my name is bandit - I have had the pleasure of visiting the last couple
>>> of
>>> saturdays.
>>> I live in Albuquerque and am a member of Quelab.net
>>> I happen to have a several month engineering gig in Hayward.
>>>
>>> I heard-tell y'all are going to build pony walls above the workshop and
>>> classrooms
>>> to cut down on the noise and dust.
>>> This is supposed to be the Fri/sat after thanksgiving (ie 25-26 Nov).
>>> Since I build houses for a hobby, and am looking for something to do
>>> those
>>> days,
>>> I am happy to come up and (ahem) lend a hand.
>>> It would be most fine (ie save me a late-night/early-morning shlep on
>>> BART)
>>> if I had someplace to crash Fri night - a floor or couch is fine, I
>>> will
>>> supply the sleeping bag/etc.
>>> (Not a deal breaker, but *very* welcome.)
>>>
>>> Can someone please contact me off
>>>   the
>>> list?
>>> bandit at cruzio.com (can check on Wednesday)
>>> 505-228-8197 (cell)
>>>
>>> I have minimal tools - pouch, hammer, tape measure.
>>>
>>> Thanks ... bandit
>>>
>>> BTW -
>>> How much is the kit for
>>> >  LEDcube (animated 3D cube of LEDs!)
>>>
>>>
>>>
>>> --
>>> bandit at cruzio.com
>>> 505-228-8197
>>> bandit.name
>>>
>>> I am a systems engineer, specializing in:
>>> - Mission-Critical embedded systems
>>> - device drivers
>>> - control and data acquisition systems
>>> My stuff *works* - *all the time*.
>>>
>>> Member: INCOSE.org, PACA.org, IEEE.org, CaliforniaConsultants.org,
>>> quelab.net
>>>
>>> And to support my son: Proud members of the New Mexico .NET User Group.
>>> Please go to the community website at www.nmug.net.
>>>
>>>
>>> ------------------------------
>>>
>>> Build mailing list
>>> Build at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/build
>>>
>>>
>> _______________________________________________
>> Build mailing list
>> Build at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/build
>>
>>
>
>
> --
> Shannon Lee
> (503) 539-3700
>
> "Any sufficiently analyzed magic is indistinguishable from science."
>


-- 
bandit at cruzio.com
505-228-8197
bandit.name

I am a systems engineer, specializing in:
- Mission-Critical embedded systems
- device drivers
- control and data acquisition systems
My stuff *works* - *all the time*.

Member: INCOSE.org, PACA.org, IEEE.org, CaliforniaConsultants.org, quelab.net

And to support my son: Proud members of the New Mexico .NET User Group.
Please go to the community website at www.nmug.net.