[Build] RJ45 crimp tool / plugs available

[Jeffrey Carl Faden]

You missed one. You said Radio Shack all regular after the Radio Crap one.
HTH.


On Mon, Aug 11, 2014 at 3:21 PM, Chris Albon <mrchrisalbon at gmail.com> wrote:

> Hey Henner,
>
>   I'm heading over to the space now. I ran over to Central Computers this
> morning... they were out of crimpers. Office Crap and Office Dickhole no
> longer sell them as well. Tried to get one at the Radio Crack on Potreo,
> but it had been remodeled as a "concept store" which means they sell mostly
> cell phones... luckily I found one at the Radio Shack on San Bruno -- which
> was still a "classic" store yet to be remodeled. It was all rather
> ridiculous, but hey, I got the tool.
>
> Anyhow, I'm swinging by ...
>
>
> On Sat, Aug 9, 2014 at 10:00 PM, Chris Albon <mrchrisalbon at gmail.com>
> wrote:
>
>> Thanks!
>>
>> I'll stay tunned.
>>
>>
>> On Sat, Aug 9, 2014 at 9:13 PM, Henner Zeller <h.zeller at acm.org> wrote:
>>
>>> Hi Chris,
>>> (make sure to add all the mailinglists; by default the settings are
>>> 'non-spam' so you need to make an effort to 'reply-all')
>>>
>>> On 9 August 2014 20:51, Chris Albon <mrchrisalbon at gmail.com> wrote:
>>>
>>>> Hi All,
>>>>
>>>>   New to the space. I was going to buy one of the Belkin cheep models
>>>> from radio crack to get some work done on some freelance IT work this week.
>>>> I'm a little rusty and haven't made a patch cable since about 15 years or
>>>> so ago.
>>>>
>>>
>>> yeah, me too :)
>>>
>>>
>>>> I'm totally capable, but remember getting all of the wires to line up
>>>> and look pretty was rather a pain in the ass. Anyhow, if anyone is
>>>> interested in this (being new I have no idea what needs to get done) Could
>>>> do some work Monday night... Plus the practice would make me look like less
>>>> of a boob for when I charge for the work later in the week.
>>>>
>>>
>>> Thanks for offering help!
>>>
>>> On my TODO list are only a couple of ethernet cables that ultimately
>>> will be used as serial cables for the access control stuff.
>>> Also, there is one cable to splice together, which either could be via
>>> soldering and heatshrinkining or by crimping a plug and a connector (are
>>> these available for crimp ? Not sure). I try to be at the space on Monday,
>>> or make a little list of what I need done for you to pick up.
>>>
>>> Maybe there is something to be done for the networking stuff, I think
>>> Patrick might know best if there is need for crimping there.
>>>
>>> Thanks
>>>   Henner.
>>>
>>>
>>>> Was planning on swinging by Monday to do a little painting or anything
>>>> else that needs to get done. ...
>>>>
>>>> Anyone wants to work on this Monday afternoon or evening, let me know.
>>>>
>>>>
>>>> On Sat, Aug 9, 2014 at 12:34 PM, Henner Zeller <h.zeller at acm.org>
>>>> wrote:
>>>>
>>>>> On 9 August 2014 11:55, Jeffrey Carl Faden <jeffreyatw at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Just for completion's sake, I did look in the space just now - found
>>>>>> some crimping tools, but none for RJ45. Mitch says he's never seen one in
>>>>>> the space, and that Central Computers has them at a good price. Then
>>>>>> there's the one that Rachel has in Oakland.
>>>>>>
>>>>>
>>>>> I think I might get one at Central Computers and donate it to the
>>>>> space.
>>>>>
>>>>> -h
>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, Aug 9, 2014 at 8:22 AM, Henner Zeller <h.zeller at acm.org>
>>>>>> wrote:
>>>>>>
>>>>>>> Hi,
>>>>>>> I want to connect some ethernet and access control serial cables
>>>>>>> today. Does anyone have access to a RJ45 crimp tool and plugs for that to
>>>>>>> bring ? Or is there some in the space (uhm, that is not hidden in one of
>>>>>>> the boxes somewhere ?)
>>>>>>>
>>>>>>> Thanks,
>>>>>>>   Henner.
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Build mailing list
>>>>>>> Build at lists.noisebridge.net
>>>>>>> https://www.noisebridge.net/mailman/listinfo/build
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Build mailing list
>>>>> Build at lists.noisebridge.net
>>>>> https://www.noisebridge.net/mailman/listinfo/build
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Chris Albon
>>>>
>>>> (415) 685-3812
>>>> http://www.linkedin.com/pub/christopher-t-albon/7/52b/15a
>>>> <http://www.linkedin.com/profile/edit?trk=tab_pro>
>>>>
>>>
>>>
>>
>>
>> --
>> Chris Albon
>>
>> (415) 685-3812
>> http://www.linkedin.com/pub/christopher-t-albon/7/52b/15a
>> <http://www.linkedin.com/profile/edit?trk=tab_pro>
>>
>
>
>
> --
> Chris Albon
>
> (415) 685-3812
> http://www.linkedin.com/pub/christopher-t-albon/7/52b/15a
> <http://www.linkedin.com/profile/edit?trk=tab_pro>
>
> _______________________________________________
> Build mailing list
> Build at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/build
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/build/attachments/20140811/42e38793/attachment.html>