[Build] lasersaur?

[jarrod hicks]

Thank you for holding the laser cutter Shannon and Andy.

I don't think we are ready for the laser cutter. Unless I am mistaken, we
haven't had our inspection yet; which was the foremost reason from removing
the laser cutter from the space.

On Thu, Oct 2, 2014 at 9:54 PM, Shannon Lee <shannon at scatter.com> wrote:

> My plan is to go get it from Andy's and take it over to Noisebridge this
> weekend (or possibly tomorrow evening, depending on work).
>
> --S
>
> On Thu, Oct 2, 2014 at 9:23 PM, Andy Isaacson <adi at hexapodia.org> wrote:
>
>> On Mon, Sep 29, 2014 at 10:36:48AM -0700, daravinne wrote:
>> > the last i heard, the current laser cutter needed a replacement part,
>> can
>> > someone confirm/deny?
>>
>> On Mon, Sep 29, 2014 at 11:21:02AM -0700, Mitch Altman wrote:
>> > I'm not up on the status of our laser cutter.
>>
>> I helped Shannon move it out of 2169 before the Reboot, so we can move
>> it back now that reboot is complete, I think, right?
>>
>> I don't know the laser cutter well enough to say if it's in need of
>> replacement parts, but it does seem to have gone through a lot of use
>> and could use some TLC.
>>
>> -andy
>> _______________________________________________
>> Build mailing list
>> Build at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/build
>>
>
>
>
> --
> Shannon Lee
> (503) 539-3700
>
> "Any sufficiently slow descent into barbarism is indistinguishable from
> normalcy."
>
>                   -- @mediapathic
>
> _______________________________________________
> Build mailing list
> Build at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/build
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/build/attachments/20141002/8be032d1/attachment-0003.html>