[Noisebridge-congress] rad1o

[Ronald Miloh Alexander]

I started reading up on the cccamp15 rad1o badge before leaving, for
those that want to hack on it, there's a "things to bring" section
of the rad1o wiki at 
 
 https://rad1o.badge.events.ccc.de/

    Micro USB cable
    OTG cable, if you would like to use the badge with your mobile phone (Wikipedia)
    Portable Display Screen Equipment, ideally with selected software pre-installed
    external power bank
    external antenna (Antennas)
    LEDs (WS2812B LEDs) (8 LEDs per badge, see RGB LEDs for details)
    something to cover the light sensitive chip on the display (e.g. a dark permanent marker, nail polish, or a dark sticker)


Lots of detail on these parts here:
 https://rad1o.badge.events.ccc.de/parts


Note: if you are considering 3D printing a case, with the high heats you should
sous vide anneal the prints so they can withstand the summer heats.
 https://plus.google.com/+JamesKaoM/posts/JBUw39CkpNV

If you don't have time or funds to get any hardware, get copies of the rad1o repos at the rad1o orga account on github:
 https://github.com/rad1o


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://www.noisebridge.net/pipermail/congress/attachments/20150806/aaf0b341/attachment-0002.sig>