[Darkroom] State of the room?
hurtstotouchfire at gmail.com
Sat Sep 4 01:01:59 UTC 2010
It's definitely time for a work day. I'm free this weekend.
Last I checked, none of the shelf-like boards in the shop were sufficient
for the shelves. There was some pressed board but not large, flat plywood.
We can check again though. There might also be some dimensions issues, I
>Also I found a 64" 2x4 in the pile of wood in the woodshop area and stashed
it in the darkroom too. One of its long edges is sorta sheared off but it
seems like it'll work.
I think I know the one you mean. We might have sheared it when we were
making the sink stand actually. Anyway, yeah it should be fine.
On Fri, Sep 3, 2010 at 17:04, Lilia Markham <liliakai at gmail.com> wrote:
> Acquired: 8 12"x14" shelf brackets, two door hinges, and one big hook and
> eye set for a latch. Couldn't find black though, srry. :-/ They're in an ace
> hardware bag in the d'room.
> Also I found a 64" 2x4 in the pile of wood in the woodshop area and stashed
> it in the darkroom too. One of its long edges is sorta sheared off but it
> seems like it'll work. There are plenty of boards there that we could cut
> into shelves too.
> Maybe its time for a work day soon?
> On Sep 3, 2010 2:12 PM, "Kelly" <hurtstotouchfire at gmail.com> wrote:
> The starred items are ones I don't know how to do myself. Everything else I
> have designed and spec-ed out on graph paper.
> Here's the agenda:
> -Install 2 levels of shelving above the sink using L brackets. (2 of 15" x
> 52" plywood) Second shelf should be reinforced sufficiently to support the
> countertop in it's backsplash position.
> -Cut down MDF/laminate tabletop that is currently on sink (dimensions not
> accessible at this moment, can brief someone later) to make a countertop to
> go over the long sink well.
> -Build hinge base for countertop (using a 2x4 and door hinges)
> -Install hooks for countertop to bottom shelf
> *-Design and construct some place to mount the faucet and temperature
> controller filters
> *-Figure out wtf is up with those temp control units (only Joachim seemed
> to grok them at all)
> *-Hook up sink faucets & drain (plumbing is done)
> -Build more stable tables for the enlargers. Should be 2 sep tables, both
> with space underneath for the rolling stool/bench thingies, which have
> storage and are awesome.
> Shopping list:
> 2 of 15" x 52" plywood
> L brackets (6-8?)
> Door hinges (2-3, pref black)
> 1 2x4
> Hooks or latches of some kind to attach lifted countertop to bottom
> Epoxy for counter
> Flat black paint
> Mini fridge
> On Fri, Sep 3, 2010 at 13:45, Rubin Abdi <rubin at starset.net> wrote:
> > I'm back from the thing ...
> Darkroom mailing list
> Darkroom at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Darkroom