[Fab] Laser cutter

[Corey McGuire]

I should say that cutting through the glue layers was messy, but trying 50
passes instead of just 10 might be the solution.

On Fri, May 6, 2011 at 9:01 AM, Corey McGuire <coreyfro at coreyfro.com> wrote:

> I have had little success with plywood, but I have some ideas on what to do
> next.  I have some 3/16th's luan that I've tried before.  I'm going to make
> something a little less complex and try a new tact, soon.
>
> On Fri, May 6, 2011 at 8:54 AM, Dave Johnson <dave at chenerystreet.com>wrote:
>
>> Hello Fabbers,
>>
>> New guy here: I understand from a coworker that y'all have a largely
>> functional laser cutter...can it cut 1/4" plywood? 1/8"?
>>
>> If so, I'd love to come by, throw some dollars in the jar, and play with
>> it a little. I'd probably want someone who knows their way around it to give
>> me an introduction, maybe I can arrange to meet somebody?
>>
>> I just finished my latest machine (see
>> http://www.youtube.com/watch?v=W7REmfZ6O5U) and after cutting all those
>> gears on a scroll saw I'm ready for a computer assist :-)
>>
>> Thx,
>>
>> Dave
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20110506/6a5f9f1d/attachment.html>