[Fab] Fwd: [Darkroom] any 110 film enthusiasts?

[Jason Schorr]

couldnt I just (black) tape the insides?  Possibly spraypaint it all black
and then tape the ouside?

Thanks for your reply.

-echo

On Tue, Oct 25, 2011 at 8:15 PM, Snail <snailtsunami at gmail.com> wrote:

> If you want to try for something that's light-tight, you would have to go
> for a solid build (a configuration you set when creating the gcode in
> replicatorG) and make the case design thick.
>
> I'm not positive it would be 100% light-tight, but that way you would not
> have the honeycomb internal pattern & case design thinness that would lead
> to cracks.
>
> On Tue, Oct 25, 2011 at 5:09 PM, Jason Schorr <echohtp at gmail.com> wrote:
>
>> Attempted to get some help working on a project and as you can see from
>> the below email it was suggested i speak with you guys.
>>
>> I appreciate any help you might be able to provide.
>>
>>  Cheers,
>> echo
>>
>> ---------- Forwarded message ----------
>> From: Rubin Abdi <rubin at starset.net>
>> Date: Tue, Oct 25, 2011 at 8:01 PM
>> Subject: Re: [Darkroom] any 110 film enthusiasts?
>> To: Jason Schorr <echohtp at gmail.com>
>> Cc: darkroom at lists.noisebridge.net
>>
>>
>> Jason Schorr wrote, On 2011-10-25 16:45:
>> > Not sure what more details are needed, 110 film existed in a
>> > special cartridge.  The film has been discontinued however the only
>> concern
>> > is the casing and the size of the film.  I have a few rolls of film, and
>> a
>> > caliper and want to cad it makerbot it and make it reloadable so that
>> its
>> > not a one shot deal.
>>
>> Oh, for some reason I thought I read 120. Silly me.
>>
>> So Makerbots suck at printing things that are light tight, though I'm
>> sure you know this. You might want to poke the fabrication list too.
>>
>> --
>> Rubin
>> rubin at starset.net
>>
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>>
>
>
> --
> -Snailssnailssnailssnailssnailssnailssnails
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20111025/cb0692fc/attachment.html>