[Fab] Fwd: [Darkroom] any 110 film enthusiasts?

[Snail]

Taping the inside would also work. :)

I think spraypaint wouldn't matter ... just don't use the translucent kind
of plastic. We do have plenty of black plastic, I think.

On Tue, Oct 25, 2011 at 5:17 PM, Jason Schorr <echohtp at gmail.com> wrote:

> couldnt I just (black) tape the insides?  Possibly spraypaint it all black
> and then tape the ouside?
>
> Thanks for your reply.
>
> -echo
>
>
> On Tue, Oct 25, 2011 at 8:15 PM, Snail <snailtsunami at gmail.com> wrote:
>
>> If you want to try for something that's light-tight, you would have to go
>> for a solid build (a configuration you set when creating the gcode in
>> replicatorG) and make the case design thick.
>>
>> I'm not positive it would be 100% light-tight, but that way you would not
>> have the honeycomb internal pattern & case design thinness that would lead
>> to cracks.
>>
>> On Tue, Oct 25, 2011 at 5:09 PM, Jason Schorr <echohtp at gmail.com> wrote:
>>
>>> Attempted to get some help working on a project and as you can see from
>>> the below email it was suggested i speak with you guys.
>>>
>>> I appreciate any help you might be able to provide.
>>>
>>>  Cheers,
>>> echo
>>>
>>> ---------- Forwarded message ----------
>>> From: Rubin Abdi <rubin at starset.net>
>>> Date: Tue, Oct 25, 2011 at 8:01 PM
>>> Subject: Re: [Darkroom] any 110 film enthusiasts?
>>> To: Jason Schorr <echohtp at gmail.com>
>>> Cc: darkroom at lists.noisebridge.net
>>>
>>>
>>> Jason Schorr wrote, On 2011-10-25 16:45:
>>> > Not sure what more details are needed, 110 film existed in a
>>> > special cartridge.  The film has been discontinued however the only
>>> concern
>>> > is the casing and the size of the film.  I have a few rolls of film,
>>> and a
>>> > caliper and want to cad it makerbot it and make it reloadable so that
>>> its
>>> > not a one shot deal.
>>>
>>> Oh, for some reason I thought I read 120. Silly me.
>>>
>>> So Makerbots suck at printing things that are light tight, though I'm
>>> sure you know this. You might want to poke the fabrication list too.
>>>
>>> --
>>> Rubin
>>> rubin at starset.net
>>>
>>>
>>>
>>> _______________________________________________
>>> Fab mailing list
>>> Fab at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/fab
>>>
>>>
>>
>>
>> --
>> -Snailssnailssnailssnailssnailssnailssnails
>>
>
>


-- 
-Snailssnailssnailssnailssnailssnailssnails
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20111025/9e58b548/attachment.html>