[Fab] George is working
Rachel McConnell
rachel at xtreme.com
Mon Aug 6 00:15:16 UTC 2012
Yay! Thanks so much. I will come in this week and try a print! I will also order us a bit more PLA if we are low. Does anyone have a preferred source?
-Rachel1.0
On Aug 3, 2012, at 19:26, Hao <hao at dorabot.com> wrote:
> Good job! Thanks Matthew.
>
> On Fri, Aug 3, 2012 at 5:55 PM, Matthew Bennett <norcalbarney at gmail.com> wrote:
> The Prusa named George at Noisebridge is working. I got the firmware fairly well calibrated, but there wasn't calipers with mm, so it's maybe a little off. I'll bring mine from home to get it perfect, hopefully this weekend.
>
> We're going to need more blue tape and PLA which I can bring from home.
>
> Word to the mother.
>
> -donald tronix-
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
>
> --
> DORA = DORA Opensource Robotic Assistant
> dorabot.com
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20120805/a8fbe42b/attachment.html>
More information about the Fab
mailing list