[Fab] George is working
Matthew Bennett
norcalbarney at gmail.com
Tue Aug 7 01:18:28 UTC 2012
I spent a few more hours with George today, and he's still a little crazy. It prints, but the sides are slanted, meaning it's missing steps or the belt is rubbing. Also corrected the motor torque a bit.
it should be printing fine for Replicator Wednesday, if that's happening this week (torcamp?).
On Aug 5, 2012, at 5:15 PM, Rachel McConnell <rachel at xtreme.com> wrote:
> Yay! Thanks so much. I will come in this week and try a print! I will also order us a bit more PLA if we are low. Does anyone have a preferred source?
>
> -Rachel1.0
>
> On Aug 3, 2012, at 19:26, Hao <hao at dorabot.com> wrote:
>
>> Good job! Thanks Matthew.
>>
>> On Fri, Aug 3, 2012 at 5:55 PM, Matthew Bennett <norcalbarney at gmail.com> wrote:
>> The Prusa named George at Noisebridge is working. I got the firmware fairly well calibrated, but there wasn't calipers with mm, so it's maybe a little off. I'll bring mine from home to get it perfect, hopefully this weekend.
>>
>> We're going to need more blue tape and PLA which I can bring from home.
>>
>> Word to the mother.
>>
>> -donald tronix-
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>>
>>
>> --
>> DORA = DORA Opensource Robotic Assistant
>> dorabot.com
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20120806/fe1a60d2/attachment.html>
More information about the Fab
mailing list