[Fab] George is working

[Eric Hess]

So, I have the motors, and most of the hardware parts for a Prusa.  Who do
i need to talk to about getting a set of vitamins printed?  And what could
I offer in trade for it?  Or should i just bring a roll of PLA?
Eric
On Aug 6, 2012 6:18 PM, "Matthew Bennett" <norcalbarney at gmail.com> wrote:

> I spent a few more hours with George today, and he's still a little crazy.
>  It prints, but the sides are slanted, meaning it's missing steps or the
> belt is rubbing.  Also corrected the motor torque a bit.
>
> it should be printing fine for Replicator Wednesday, if that's happening
> this week (torcamp?).
>
> On Aug 5, 2012, at 5:15 PM, Rachel McConnell <rachel at xtreme.com> wrote:
>
> Yay! Thanks so much. I will come in this week and try a print! I will also
> order us a bit more PLA if we are low. Does anyone have a preferred source?
>
> -Rachel1.0
>
> On Aug 3, 2012, at 19:26, Hao <hao at dorabot.com> wrote:
>
> Good job! Thanks Matthew.
>
> On Fri, Aug 3, 2012 at 5:55 PM, Matthew Bennett < <norcalbarney at gmail.com>
> norcalbarney at gmail.com> wrote:
>
>> The Prusa named George at Noisebridge is working.  I got the firmware
>> fairly well calibrated, but there wasn't calipers with mm, so it's maybe a
>> little off.   I'll bring mine from home to get it perfect, hopefully this
>> weekend.
>>
>> We're going to need more blue tape and PLA which I can bring from home.
>>
>> Word to the mother.
>>
>> -donald tronix-
>>
>>
>> _______________________________________________
>> Fab mailing list
>>  <Fab at lists.noisebridge.net>Fab at lists.noisebridge.net
>>  <https://www.noisebridge.net/mailman/listinfo/fab>
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>
>
>
> --
> DORA = DORA Opensource Robotic Assistant
> <http://dorabot.com>dorabot.com
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20120806/45c0d5a2/attachment.html>