[Fab] Help with the mill tonight?

[Arlen Abraham]

If you're taking material off the face of a nut, it might be easier to
do in a lathe. You can chuck up a nut nicely in a threr-jaw chuck
using a coupler nut and a bolt.

--a


On Mon, Aug 6, 2012 at 11:41 AM, Casey Callendrello <c1 at caseyc.net> wrote:
> Eric,
> The mill is on its way to ToorCamp. So unless you are going, you'll have to
> wait until the NoiseBus gets back on next Tuesday :-).
> Other than that, don't be nervous. The mill is awesome and Hao has it
> working really well.
>
> --Casey
>
>
> On 8/6/12 11:38 AM, Eric Hess wrote:
>
> Will there be anyone around this evening that could help me with some quick
> work on the mill?  I need to take 2mm off the face of four nuts.  I am about
> three hours away and this is my first visit to Northbridge, so I am a little
> nervous just showing up...
> Thanks,
> Eric
>
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>
>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>