[Fab] George is working

Elijah Post elijahpost at gmail.com
Wed Aug 8 00:03:24 UTC 2012


Matt sells them last I checked, but you can also print them on your own.

As far as I am aware, RepWed is cancelled or at least very small this week
due to toorcamp, as well as Gabriel, Andrew, Miloh, and myself not being
able to come. If there is still one, awesome!

On Mon, Aug 6, 2012 at 6:26 PM, Eric Hess <ejhess at gmail.com> wrote:

> So, I have the motors, and most of the hardware parts for a Prusa.  Who do
> i need to talk to about getting a set of vitamins printed?  And what could
> I offer in trade for it?  Or should i just bring a roll of PLA?
> Eric
> On Aug 6, 2012 6:18 PM, "Matthew Bennett" <norcalbarney at gmail.com> wrote:
>
>> I spent a few more hours with George today, and he's still a little
>> crazy.  It prints, but the sides are slanted, meaning it's missing steps or
>> the belt is rubbing.  Also corrected the motor torque a bit.
>>
>> it should be printing fine for Replicator Wednesday, if that's happening
>> this week (torcamp?).
>>
>> On Aug 5, 2012, at 5:15 PM, Rachel McConnell <rachel at xtreme.com> wrote:
>>
>> Yay! Thanks so much. I will come in this week and try a print! I will
>> also order us a bit more PLA if we are low. Does anyone have a preferred
>> source?
>>
>> -Rachel1.0
>>
>> On Aug 3, 2012, at 19:26, Hao <hao at dorabot.com> wrote:
>>
>> Good job! Thanks Matthew.
>>
>> On Fri, Aug 3, 2012 at 5:55 PM, Matthew Bennett <<norcalbarney at gmail.com>
>> norcalbarney at gmail.com> wrote:
>>
>>> The Prusa named George at Noisebridge is working.  I got the firmware
>>> fairly well calibrated, but there wasn't calipers with mm, so it's maybe a
>>> little off.   I'll bring mine from home to get it perfect, hopefully this
>>> weekend.
>>>
>>> We're going to need more blue tape and PLA which I can bring from home.
>>>
>>> Word to the mother.
>>>
>>> -donald tronix-
>>>
>>>
>>> _______________________________________________
>>> Fab mailing list
>>>  <Fab at lists.noisebridge.net>Fab at lists.noisebridge.net
>>>  <https://www.noisebridge.net/mailman/listinfo/fab>
>>> https://www.noisebridge.net/mailman/listinfo/fab
>>>
>>
>>
>>
>> --
>> DORA = DORA Opensource Robotic Assistant
>> <http://dorabot.com>dorabot.com
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>>
>> _______________________________________________
>> Fab mailing list
>> Fab at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/fab
>>
>>
> _______________________________________________
> Fab mailing list
> Fab at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/fab
>
>


-- 
-E. Post
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/fab/attachments/20120807/a53f4b28/attachment-0001.html>


More information about the Fab mailing list