[Fab] Is laser cutter and CNC milling machine in Noisebridge still in order?
froggytoad at gmail.com
Fri Jun 8 22:47:20 UTC 2012
Is there a checklist for operating the laser? is it possible the estop was
On Jun 8, 2012 2:28 PM, "Hao" <hao at dorabot.com> wrote:
> Hi Fab guys in Noisebridge,
> I'm starting an open source robot project, and I'll need to use laser
> cutter and CNC milling machine to make my parts. I'd like to know are these
> two machine still working now? and what should I know, besides everything
> listed on the two wiki page (https://www.noisebridge.net/wiki/Lasercutter
> and https://www.noisebridge.net/wiki/MaxNCMill) before I start using
> P.S. When I ask Stephen Balaban to teach me how to use laser cutter, the
> machine won't work. While the laptop besides it shows "connected" on the
> left bottom corner of the screen, the laser tube won't move at all after
> click "go". That's why I'm asking.
> Thanks, guys
> DORA = DORA Opensource Robotic Assistant
> Fab mailing list
> Fab at lists.noisebridge.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Fab