[EEG] electrodes

[Tracy Jacobs]

Well, when you look at Pedro's whole setup for 4 channels, he is using  
8 xlr plugs plus one drl.

The way Mitch wired up these two electrodes I have makes it seem like  
I can't wire them up to one xlr plug, but would need 2 for each  
electrode, because each electrode has 2 cables with wires going to  
different things.

The passive elctrode diagram is much simpler, it looks like 2  
electrodes/one channel going to  one xlr plug with one cable per  
electrode?

The wiring looks really  different to me...

Tracy
On Dec 21, 2009, at 9:55 PM, Josh Bailey wrote:

>
> Bit confused. The major difference between active/passive wiring is  
> with
> active you of course have to ship the power up to the 'trode. I  
> don't see
> any other major difference (i.e. I don't expect to see one)? What am I
> missing?
>
> On Mon, 21 Dec 2009, Tracy Jacobs wrote:
>
>> Hello group,
>>
>> I was studying the instructions on the open EEG site for the case and
>> cabling again, and it looks like you hook up the cables a bit
>> differently for the active elctrodes that I made :
>>
>> http://www.dcc.uchile.cl/~peortega/ae/
>>
>>
>>
>> than you might want to do for the cap or for passive electrodes.
>>
>> http://openeeg.sourceforge.net/doc/SimpleEEG/CaseCabling.html
>>
>>  So, I'm not a little unsure  how to proceed with the wiring.
>>
>> I made 4 of the PEdro's active electrodes, boards and all, and it
>> would be lovely to get them to work. But that's still only two  
>> channels,
>>
>>  Mitch said to use his boards with mine for the 4 channel.  There is
>> enough room for 8 channels in this box, at least, if we can find the
>> boards.
>>
>>
>> Tracy
>> _______________________________________________
>> EEG mailing list
>> EEG at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/eeg
>>
>>
>
> -- 
> Josh Bailey (josh at anarkiwi.com)