[Noisebridge-announce] Maker Fair 2015 build night - 2015-03-12 at 19:00 - 22:00 in the Shop

[jarrod hicks]

Greetings.

This coming Maker Faire build night we will continue working on the
tabletop parts. We will also go over the working drawings for the table and
get a sense of how the build is going to proceed. We will be using the
table saw and plate (or biscuit) joiner. If you haven't used these tools
before, you are welcome to attend, learn, and try them out.

The plan for the next build night, March 12th, is here:

*https://noisebridge.net/wiki/Maker_Faire_Build_Night_2015-03-12
<https://noisebridge.net/wiki/Maker_Faire_Build_Night_2015-03-12>*

The .pdf of the current working drawings for for the table that we are
building is here:

https://noisebridge.net/images/a/a7/Noisebridge_MakerFaire_Table.pdf

Maker Faire booth build nights are every Thursday 19:00 - 22:00 until Maker
Faire. You are invited to help build, even if you haven't done woodwork or
electronics stuff before. Here is the recap of the last build night were we
made another test piece and started cutting the plywood for the table.

*https://noisebridge.net/wiki/Maker_Faire_Build_Night_2015-03-05
<https://noisebridge.net/wiki/Maker_Faire_Build_Night_2015-03-05>*

If you haven't seen it yet, the wiki page for the project is here.

*https://noisebridge.net/wiki/Maker_Faire_2015
<https://noisebridge.net/wiki/Maker_Faire_2015>*

If you can't help us build, no worries, but please consider helping in
these other ways:
1. lend/bring your projects, demonstrate your projects, and teach others
you know at the show
2. work on projects at the show, and have projects for others to work on
3. spread the word about us needing help with the build and the show content

Cheers!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-announce/attachments/20150309/031e8da3/attachment-0003.html>