[Noisebridge-discuss] RepRap Chassis Team Status

[Rich Gibson]

I am a tech shop member right now.  I'm working in Mountain view about
half time, so
I can probably cut things there.

There is also a TAP plastics near to where I work at Ames.

Cheers,
Rich

On Mon, Nov 17, 2008 at 11:01 AM, Shannon Lee <shannon at scatter.com> wrote:
> Hey All,
>
> John did a magnificent job cutting our aluminum on Friday, despite the fact
> that I bailed on him.  Go John, you rock!
>
> This week, we need to get the pieces drilled and the basic frame screwed
> together.  I should have printed labels at 83c tonight or tomorrow morning,
> and hope to do at least some of the drilling before the meeting tomorrow.
>
> The last remaining piece in the chassis part of this project is the acrylic
> bits, which need to either (a) be purchased at Tap and cut on a laser cutter
> or (b) be ordered as a kit from the RRRF.  I've been waffling on this in the
> hopes that a laser cutter would appear... so if you have one, let me know.
> The RRRF kit isn't all that expensive ($125) but (a) I'd rather do it
> ourselves and (b) it's reputed to take a while.
>
> If someone has access to a laser cutter -- or, even better, wants to take on
> the project of getting the acrylics cut -- I'd love to hear from you.
>
> More next week,
>
> --S
>
> --
> Shannon Lee
> (503) 539-3700
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>