[Noisebridge-discuss] Noisebridge Build Status & Next Needs

Shannon Lee shannon at scatter.com
Sat Oct 11 03:00:40 UTC 2008


No *max*, I guess, the shelving is adjustable, but it's currently set to
accomodate things that are 10" high, and they're about 10" deep, so that
seems about what we'd be looking for.

On Fri, Oct 10, 2008 at 7:51 PM, jim <jim at well.com> wrote:

>
> what size bins? what's the max height, length, depth (or width).
>
>
> On Fri, 2008-10-10 at 15:44 -0700, Shannon Lee wrote:
> > Hey all,
> >
> > This is the end of Week 2 of the NoiseBridge space buildout.  We've
> > got tables and desks, a couch, and more shelves than god... and Jim is
> > downstairs right now installing additional electrical into the shop
> > (including this fantastic knife-switch EPO that goes BANG when you
> > pull it!  Thanks Jim).  We're right on the verge of having a usable,
> > functioning hack space.
> >
> > What we still need in order to call the space "ready":
> >
> > * Chairs -- we need about 20 or so folding chairs, preferably the
> > steel ones that don't fold up into scrap when someone my size sits on
> > them.  They range from $12 to $25 depending on where you buy them,
> > I've seen them for $12 at Staples.  If you're heading down to the
> > space, stop by Staples or Office Depot or Costco or wherever and buy a
> > couple of chairs to bring.
> >
> > * Stools -- we need 5-7 shop stools, the kind you'd sit on to rebuild
> > a transmission or belly up to a bar.  I like the round grey steel ones
> > with the hardboard tops, but we're not choosers here.
> >
> > * Bins -- project bins. You should bring one for your project, but
> > consider bringing one for someone who forgot, too :)
> >
> > * Tools -- we're about ready to start putting tools in the shop and
> > elsewhere.  I'm open to suggestions as to what we need, but I'm pretty
> > sure we're going to want a chop saw, a bench grinder, a small lathe,
> > and a couple of dremels, as well as hand tools and rechargable drills
> > &c of all sorts.
> >
> > It's been a great two weeks, thanks for all the hard work and
> > contributions, and I look forward to much more!
> >
> > --Shannon & The Build Team
> >
> >
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20081010/b2aac303/attachment-0003.html>


More information about the Noisebridge-discuss mailing list