[Noisebridge-discuss] RepRap progress

Martin Bogomolni martinbogo at gmail.com
Wed Feb 4 22:46:21 UTC 2009


Were the arms I made for the mcwire sufficient?  One had an overcut,
and I was worried that it might break... I could always recut and
recountersink one when I get back on 2/10.

-Martin

On Wed, Feb 4, 2009 at 3:37 AM, Andy Isaacson <adi at hexapodia.org> wrote:
> Several new Noisebridgers joined me Tuesday evening for an impromptu
> RepRap workshop.  We assembled some more electronics (heatsinks etc) and
> figured out the current state of the mechanical stage portions.
>
> I also ordered three stepper motors off of eBay.  Unfortunately the ones
> specified in the McWire instructions were not available, so hopefully
> they'll be workable and the vendor won't screw up the order.
>
> Shannon, we took the RepRap parts off of your shelf (sorry about that)
> and have made a new RepRap working box underneath the shop benches.  We
> can discuss this if you'd like a different solution; and of course, if
> RepRap goes dormant again the box will get moved in short order.
>
> Please feel free to update the RepRap wiki page and use its Talk page
> for discussion!
>
> -andy
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>



More information about the Noisebridge-discuss mailing list