[Noisebridge-discuss] Varathane Alert! (re upstairs workbench surfaces)
jim
jim at well.com
Wed Jan 7 23:03:27 UTC 2009
(shannon l. and steen and others interested)
for the worktables for upstairs:
* one (large) piece of plywood is upstairs
with six coats of varathane. done, ready
for use.
* one (small) piece of plywood is still in
the workshop-fishbowl room and as of noon
today has five coats and needs one last
coat (sandpaper and small 2x4 as sanding
block are on benches close to varathane
and brush-in-water. please return the brush
to the water container after coating the
plywood. when it's dry, take it upstairs as
done, ready for use.
* one (medium) piece of plywood used to be
upstairs. it's now at my house where i will
give it two coats of shellac and then likely
return it to 83C for its five or six coats
of varathane (i may opt to coat it at my
house using varnish or polyurethane of some
kind). holler if you have religious
convictions as to coatings.
(note final wiring run is done for upstairs
workbenches.)
More information about the Noisebridge-discuss
mailing list