[Noisebridge-discuss] Muralizer (drawbot) meetup!

[Adam Skory]

Hey all, I think Josh has laid out a pretty clear idea from which we
can proceed.

I will be at Zeitgeist around 7ish. If anyone wants to talk about some
first steps I think we can do so and then report back to our dear sick
project leader Josh after.

-Skory

On Mon, May 4, 2009 at 4:09 PM, Leo Dearden <leo.dearden at googlemail.com> wrote:
> h2009/4/30 Josh Myer <josh at joshisanerd.com>:
>> This is a really cool project, with some really cool people interested
>> already.  There's always going to be room for more contributions, so
>> if you might be interested, come on by to see what we're up to!
>
> Robots everywhere!
>
> I've already been interested in CNC camera dollies and next gen
> vending machines today so this makes three new robots just today!
>
> This sounds awesome. I can't make today (I'm in LA), and I've already
> got a lot on the go in the short run, but I'm intersted and I may
> already have a big part of the stack: If you're willing to use a linux
> PC instead of an Arduino, you could use EMC2 (www.linuxcnc.org). for
> all the layers from instruction interpreting through motion planning
> to step pulse generation (or whatever digital output we settle on).
> It's extremely versatile and robust, and I use it to control a CNC
> router. I'd be happy to help set it up if that's what we decide to go
> with.
>
> Cheers,
>
> Leo
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>