[Noisebridge-discuss] getting that goddamned mill to work

Ani Niow v at oneletterwonder.com
Mon Sep 28 22:35:02 UTC 2009


The mill is located in the shop area at 2169. If anyone thinks they can make
it work, give it a shot. I highly encourage it.
It uses a parallel port rather than a serial btw.


Do-ocracy ftw.



Ani

2009/9/28 dpc <weasel at meer.net>

> Jonathan Foote <jtfoote at ieee.org> writes:
>
> > Someone want to find a PC with a serial port and install the linuxcnc
> > ubuntu image?
>
> i had/have an emc image from when i was dicking w/ emc for the
> muralizer. i think you'd want a parallel port rather than a serial port
> (i've never looked at the mill itself).
>
> reversing would be easier if the dos thing worked, but some other
> respondant seemed to think that this model was in emc by default?
>
> \p
> ---
> On the Continent people have good food; in England people have good
> table manners. - George Mikes
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20090928/e8796bb6/attachment-0003.html>


More information about the Noisebridge-discuss mailing list