[Noisebridge-discuss] buying an arduino over the weekend?

[Michael Shiloh]

If you are in SF I should have some. My shipment is supposed to arrive 
today.

If you are in the East Bay then Al Lasher has them in stock. They are 
open today but close early, and they are closed on Sunday.

On 08/21/2010 08:50 AM, Casey Callendrello wrote:
> Did you see the magic smoke get let out? If not, it's quite possible
> that you just need to reset the internal fuses on the Atmega.
>
> You can do it with a breadboard and another arduino. See http://www.societyofrobots.com/member_tutorials/node/239
> --Casey
>
> On Aug 21, 2010, at 1:18 AM, Daniel Garcia<DGARCIA at DGARCIA.NET>  wrote:
>
>> I seem to have blown out my Duemilanove this evening (I suspect I
>> managed to short something out - i'm not sure - it's refusing to
>> upload new code now, though) - unfortunately this is a bad time to
>> have the board blow out, I'm in the middle of a project on it.  Is
>> there anywhere in the bay area (east bay or SF) that stocks these
>> things that's open on saturdays?  It appears that the fremont fry's
>> has them (albiet at a price hit), and also that jameco carries them,
>> though they aren't open until monday.
>>
>> Next time, i'll order two...
>>
>> --Dg
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>

-- 
Sent from my ASR-33