[Noisebridge-discuss] CNC Mill workshop Friday 1/15 6pm

[Jonathan Foote]

The PCB I saw are smaller rectangles of 2-sided. Certainly not 24
inches and not 4-layer (how does that work!?) which we now know to
leave.
Besides DPC's smaller pieces, Miloh said his friend also contributed
some, so thanks all!

On Sun, Jan 10, 2010 at 5:46 PM, Martin Bogomolni <martinbogo at gmail.com> wrote:
> If it is the copper clad wrapped in brown kraft paper (aka, grocery
> bag paper) check to see if the wrapper bag is labeled with an "MB" on
> the corner.  I have four 24x24 sheets of 4-layer which should be
> living on my shelf for the next time I come to SF.   Please don't use
> it if it's migrated from it's proper location ... I need it for doing
> some prototyping.
>
> -Martin
>
> On Sun, Jan 10, 2010 at 1:25 PM, Jonathan Foote <jtfoote at ieee.org> wrote:
>> We interrupt this series of trolls to bring an actual activity, namely
>> the CNC Mill Workshop, this Friday at 6PM.
>>
>> Learn to use the mill for 2D engraving and isolation routing of PCBs.
>>
>> (Note the mill is loud and this may not be a good time to host other
>> events/classes, but the calendar looked clear and Shop Class is Friday
>> nights as well).
>>
>> Details here:
>> https://www.noisebridge.net/wiki/CNC_Mill_Workshop
>>
>> I spotted a big pile of copper-clad PCB in the electronics area. Does
>> anyone know if this is available for general use/abuse?
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>