[Noisebridge-discuss] No working bandsaw at the space?

[Shannon Lee]

There's also the radial arm saw

On Fri, May 14, 2010 at 10:55 AM, miloh <froggytoad at gmail.com> wrote:

> There is a circle saw (a red skilsaw with plug) in the shop, it is in a
> black bottom drawer of the SE corner storage bench.  I used it to make cuts
> for the EE benches with C clamps and some scrap as straight edges.  The C
> clamps are stored in the NE corner bench drawers, the saw currently has a
> plywood cutting wheel attached to it.
>
> On May 14, 2010 10:39 AM, "Gian Pablo Villamil" <gian.pablo at gmail.com>
> wrote:
>
> I need to make a couple of simple cuts in plywood, but noticed that
> both bandsaws in the shop are out of commission. Any alternatives?
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>


-- 
Shannon Lee
(503) 539-3700

"Any sufficiently analyzed magic is indistinguishable from science."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20100514/bd9be706/attachment-0003.html>