[Noisebridge-discuss] NB Logo - Stencilfied : Plasma Cutting at Boxshop
Shannon Lee
shannon at scatter.com
Fri Jan 28 18:35:58 UTC 2011
That is awesome.
On Fri, Jan 28, 2011 at 1:15 AM, Corey McGuire <coreyfro at coreyfro.com>wrote:
> Here's the sign.
>
>
> On Sun, Jan 23, 2011 at 8:44 PM, Corey McGuire <coreyfro at coreyfro.com>wrote:
>
>> SUCCESS! Mostly. The cut quality was perfect at first, but then slowly
>> degraded. The consumables were good enough. We think the air compressor
>> couldn't keep up with such a long cut at such a low speed. The obvious
>> solution is to insert pauses in to the cut execution or maybe even in the
>> gcode its self. Also, at certain points, the machine wasn't tracking
>> perfectly. We think it's due to bed wiggle after rapid moves between cuts.
>> A possible solution is a pause after every rapid move. Another is to
>> possibly add another horizontal brace to the bed, but that is easier said
>> than done.
>>
>> The CAM software I found was great but it has a bug where it outputs 5
>> lines of g-code and stops. Then the program must be quit, reopened,
>> settings rechecked, parts reloaded, and the post processing done again.
>> It's not so bad once it's recognised. The copy I have is a development
>> version. I can try a different version and see if the problem is gone.
>>
>> Photos when I get a decent camera.
>>
>>
>> On Sat, Jan 22, 2011 at 11:25 PM, Corey McGuire <coreyfro at coreyfro.com>wrote:
>>
>>> Tomorrow I am vaporising metal! Here is the latest tool path for a
>>> plasma engraver. The colors are how the CAM software I am using separates
>>> layers.
>>>
>>> LAST CHANCE to say "I don't like the font".
>>>
>>> For Non-Noisebridge folk, Ray and I are blasting steel to bits tomorrow
>>> for various projects. We have metal, we have shapes, and we now have some
>>> REALLY AWESOME sheet metal CAM software that will, hopefully, ease
>>> everyone's minds when they convert ideas to metal.
>>>
>>> This software is GREAT...in theory...We'll find out more tomorrow.
>>>
>>> If this process works, we will certainly share it.
>>>
>>> On Sun, Jan 16, 2011 at 1:18 AM, Corey McGuire <coreyfro at coreyfro.com>wrote:
>>>
>>>> If all goes as planned, I'll have this, or something like it, a week
>>>> from now.
>>>>
>>>> On Wednesday, January 5, 2011, Corey McGuire <coreyfro at coreyfro.com>
>>>> wrote:
>>>> > Thanks!
>>>> >
>>>> > Yeah, i needed to fit the image under the 80k attachment limit. The
>>>> > original image is svg, so no problems in the path.
>>>> >
>>>> > On Wednesday, January 5, 2011, Rachel McConnell <rachel at xtreme.com>
>>>> wrote:
>>>> >> I think these look great. Looking forward to seeing the finished
>>>> sign!
>>>> >>
>>>> >> On the inlined stencil (that was attached to this message) there may
>>>> be
>>>> >> missing lines? On the bottom of the circuit segment, on each side of
>>>> >> the bump. May just be a display issue though.
>>>> >>
>>>> >> Corey McGuire wrote:
>>>> >>> Here's the path for the stencil inclined
>>>> >>>
>>>> >>> On Wed, Jan 5, 2011 at 10:40 AM, Corey McGuire <
>>>> coreyfro at coreyfro.com
>>>> >>> <mailto:coreyfro at coreyfro.com>> wrote:
>>>> >>>
>>>> >>> This bounced for size, here's a smaller version. This is for a
>>>> HUGE
>>>> >>> F'N METAL SIGN.
>>>> >>>
>>>> >>> I am inviting criticism.
>>>> >>>
>>>> >>> This is using the eurostile stencil font which is bolder and
>>>> heavier
>>>> >>> than the eurostile bold font. I think some of the other fonts
>>>> may
>>>> >>> match better but may not necessarily look or work better
>>>> (because
>>>> >>> robust stencil bridges are important for plasma cutting.)
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>>
>>>> ------------------------------------------------------------------------
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> Noisebridge-discuss mailing list
>>>> >>> Noisebridge-discuss at lists.noisebridge.net
>>>> >>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> >>
>>>> >
>>>>
>>>
>>>
>>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
--
Shannon Lee
(503) 539-3700
"Any sufficiently analyzed magic is indistinguishable from science."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20110128/309516fd/attachment.html>
More information about the Noisebridge-discuss
mailing list