[Noisebridge-discuss] the laser engraver

[Casey Callendrello]

The X belt tension needs to be adjusted. I tweaked it a week ago, but it 
isn't perfect. There is a HOWTO posted by FullSpectrum here: 
http://www.youtube.com/watch?v=RjhvEfKQ_Mo. Do it.

--Casey

On 7/28/11 3:54 PM, Danny O'Brien wrote:
> Also bouncing to fab, where there's been more discussion of this I believe
>
> On Thu, Jul 28, 2011 at 3:49 PM, Michael Ashmore<motomike at gmail.com>  wrote:
>> Au contraire, sir. You are sufficiently dissatisfied with the
>> situation to write to the list, an action which (barring other
>> activity on the laser-engraver-fixing front that I'm unaware of) would
>> appear to make you the *very best* person to try and fix it.
>>
>> Even if your approach to "trying to fix it" consists of standing over
>> the engraver with a menacing look until somebody more technically
>> inclined comes over to ask what your intentions are with that sawzall.
>>
>> -Moto
>>
>>
>> On Wed, Jul 27, 2011 at 5:28 PM, Dan Cote<terminationshok at gmail.com>  wrote:
>>> A few weeks ago there was an issue with the laser engraver. Although it has
>>> been repaired, the quality of the engravings has suffered. The horizontal
>>> axis is far less accurate now, even at 10% speed. I think the problem has to
>>> do with the belt. I am very dissatisfied with this situation, but I am
>>> afraid I am not the best person to try and fix it.
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss