[Noisebridge-discuss] Machinery's Handbook, 28th ed.

[Tymm Twillman]

http://www.marfas.com/machinescrewtapping.shtml

size 29 / .1360" (unless going into steel / iron).

On Fri, Mar 18, 2011 at 9:58 AM, Sean Cusack <sean.p.cusack at gmail.com>wrote:

> omg perfect timing! I was just wondering this morning how big of a hole I
> needed to drill to provide adequate clearance for a #8 screw. Thanks!!
>
> Sean
>
>
> On Thu, Mar 17, 2011 at 10:42 PM, Seth David Schoen <schoen at loyalty.org>wrote:
>
>> I just donated one of these:
>>
>> https://secure.wikimedia.org/wikipedia/en/wiki/Machinery%27s_Handbook
>>
>> I put it in the shop, which might be a conventional place for this. :-)
>>
>> --
>> Seth David Schoen <schoen at loyalty.org> | Qué empresa fácil no pensar en
>>     http://www.loyalty.org/~schoen/   | un tigre, reflexioné.
>>     http://vitanuova.loyalty.org/     |            -- Borges, El Zahir
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20110318/12ec062d/attachment-0003.html>