[Noisebridge-discuss] MCU > 80MHz, low pincount, power saving?

Alex Perez aperez at alexperez.com
Fri Nov 11 23:12:29 UTC 2011

Check out the Freescale Kinetis K60 (100MHz ARM Cortex-M4). They are 
available in 100 & 144 pin LQFP (as well as 144 pin MAPBGA!) form 
factors, ideal for mounting on SchmartBoards for easy proto-soldering. 
The part I recommend is PK60N512VLQ100 (144 pin), and it's available 
from Digi-Key in single quantities for $14, but is much cheaper in 
Since you didn't specify what your actual MCU price range is, it may 
not be ideal.
------ Original Message ------
From: "Anders Nelson" <anders.k.nelson at gmail.com>
To: "Dorkbot Dorkbot" 
<dorkbotsf-blabber at dorkbot.org>;noisebridge-discuss at lists.noisebridge.net
Sent: 11/11/2011 2:49:32 PM
Subject: [Noisebridge-discuss] MCU > 80MHz, low pincount, power saving?
>Hey all,
>I'm looking for the fastest MCU I can find that has the following 
>-low pincount (64 pins or less)
>-super fast (>80MHz)
>-3 SPI ports
>-high current GPIO (25mA)
>-low power (within 100mA at speed)
>An FPGA would be the easy choice but I just don't think I can find one 
>at an MCU price... Or does someone know of very low-cost FPGAs within 
>which I can implement like 512 counters between 8 and 16 bits in width?
>Anders Nelson
>+1 (517) 775-6129
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20111111/0b8988f7/attachment.html>

More information about the Noisebridge-discuss mailing list