[Noisebridge-discuss] Weird Problem with Generating Gcode

[Theron Trowbridge]

Try running them through Netfabb (http://cloud.netfabb.com/) - it will
often fix problematic STLs that won't slice.


-Theron
^

On Sun, Nov 27, 2011 at 12:50 AM, Elijah Post <elijahpost at gmail.com> wrote:

> There are some STLs in this world that are for some reason impossible to
> make Gcode with. For example, the Prusa X Idler and Motor Mount - the kind
> that requires no PLA Bushings, just slides right on to the smooth rods.
>
> No matter what I do, I can't successfully make toolpath for these rascals.
> I'm using RepG 0027, Skienforge 35, Cupcake HBP, no raft. Attached are the
> files. I tried them on two different computers to no avail.
>
> P.S. Could it be that they are not millimetres binary? That's be weird
> because Prusa himself put them on Thingiverse and GitHub.
>
> --
> *Elijah Louis Spenser Post
> Mechanic (San Francisco Bike Kitchen)*
> *Participant (NoiseRep at Noisebridge)*
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20111127/37c4bcea/attachment-0003.html>