[Noisebridge-discuss] Do we have PCB etching equipment?

[Just Duncan]

that's good for drilling t5hem, but what relay is the things to etch the
boards from scratch. so what i do usually is design the schismatic then
print on the board or use photo sensitive PCB board and then etch in ferrous
chloride to remove the copper and leaving the tracks behind.

thanks,

markbot.

On Wed, Sep 28, 2011 at 4:59 PM, Rrmutt <rrmutt at gmail.com> wrote:

> Short answer: .01 carbide end mill bits on a 1/8 shank
> Tldr:  <https://www.noisebridge.net/wiki/MaxNCMill>
> https://www.noisebridge.net/wiki/MaxNCMill
>
>
>
> On Sep 28, 2011, at 1:45 PM, Just Duncan <justduncan at gmail.com> wrote:
>
> More specifically, he wants to order some bits and would like to make sure
> he is ordering ones that are compatible with what(ever?) equipment we have.
>
> On Wed, Sep 28, 2011 at 1:25 PM, Just Duncan < <justduncan at gmail.com>
> justduncan at gmail.com> wrote:
>
>> Mark, who is visiting from the UK and doing some really cool stuff with
>> LED's and motion sensors, asked where this might be.  Knowing what I know
>> and knowing what I don't know, this clearly falls into the latter
>> category... but I know where to find out! :-)
>>
>> And the answer is...?
>>
>> Thanks in advance!
>>
>> Duncan
>>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20110928/bd40a202/attachment-0003.html>