[Noisebridge-discuss] PLEASE READ: Laser Cutter Threat Model

[Will Sargent]

Hi all,

So some of you may remember from the last meeting that Rayc moved the laser
cutter from the backroom to the front room, and set up a venting system.  I
vaguely remembered that a number of people were deeply paranoid about
setting up the system to vent correctly, and so I asked around.

The threat model posed by the Laser Cutter and the reason it has to be
vented is not "laser cutter gives off stinky fumes."

The threat model is "When used with the wrong substance, laser cutter fumes
can potentially contain cyanide gas that can kill everyone in the room."

http://www.atxhackerspace.org/wiki/Laser_Cutter_Materials

I asked someone from AMT to come by the space to check it out, and the
verdict is "I believe the current ventilation setup is fine for indoor
plywoods, acrylic, and natural materials however it is most certainly not
sufficient for anything toxic or chlorinated."

So NO, IT IS NOT SAFE.

Will.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20120409/17afcc96/attachment.html>