[Noisebridge-discuss] drill press table

Scotty Allen scotty at scottyallen.com
Wed Apr 11 20:54:02 UTC 2012

There's a blue vice that I've used with the drill press a fair amount.
 On Monday, someone had being doing some organizing(yay!) and put it
in a bin of c-clamps and other similar devices under the tool cabinet
on the wall to the right of the drill press.  That was the last place
I saw it.  Not sure if that's what we're talking about here.

On a related note, there's a cross slide vice that's floating around
that looks like this:
 However, it's broken somewhat catastrophically:(  It has two breaks
in the metal frame that prevent the vice part from clamping anything,
which I imagine were caused by tightening the vice down until it

It would be nice to fix this, but I don't know the best way to repair
it.  Does someone have access to a welder?  If not, maybe it's
possible to drill/tap some holes on either side of the break and
attach a metal strap to hold the two pieces together.  Thoughts?


On Wed, Apr 11, 2012 at 1:33 PM, Jonathan Lassoff <jof at thejof.com> wrote:
> On Wed, Apr 11, 2012 at 1:29 PM, Wladyslaw Zbikowski
> <embeddedlinuxguy at gmail.com> wrote:
>> This is what it looks like right now:
>> http://modernhacker.com/drill-press.jpg
> This is what I've always remembered it being.
> From time to time, a nice vise has been bolted to that bottom plate.
> --j
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss

More information about the Noisebridge-discuss mailing list