[Noisebridge-discuss] Seeking help with building Prusa Mendel I2

[Ohad Eder-Pressman]

Thanks Miloh, I really appreciate everyone's help here.
I'm hoping to drop-in at Noisebridge this Wednesday, do you know if
Bay-Area reprap group is meeting somewhere else?

Cheers

-ohad


ohadpr.com | @ohadpr <http://twitter.com/ohadpr> | 415-347-6176
(San Francisco)



On Tue, Dec 11, 2012 at 7:27 PM, miloh <froggytoad at gmail.com> wrote:

> On Tue, Dec 11, 2012 at 1:22 PM, Dan Roberts <ademan555 at gmail.com> wrote:
> > Hi Ohad,
> >     I am just finishing up a Prusa i3 build myself. I printed all plastic
> > parts at Noisebridge, there are makerbots (and one functioning Prusa i2)
> > there with PLA and ABS galore.
> >
> > As for sourcing electronics I'd recommend RAMPS from a reputable source
> if
> > you aren't sure what you want yet. Kliment's 4pi is expensive but very
> cool
> > it's (one of?) the first non AVR electronics control boards. Personally I
> > bought a Generation 7 electronics kit from Markus Hitter (Traumflug)
> because
> > it's inexpensive and VERY DIY friendly. (The PCB is single sided so you
> > could etch it at home) The generation 7 board is very featureless
> though, so
> > my overall recommendation is RAMPS.
> >
> > As for other parts, I got my NEMA-17s from robosprout (CCecil on IRC,
> nice
> > guy) and everything else from either fastenal (retail, had many but not
> all
> > fasteners) and mcmaster carr for everything else.
> >
> > Hope that helps. Note there's also a bay area section on the reprap
> forums.
> >
>
> Hi Ohad
>
> Adding to Dan's suggestion about bay area reprap groups:  The bay area
> reprap group meets on Wednesdays in different locations in the Bay
> Area.  The activity is currently over at the google group:
> bay-area-reprap at googlegroups.com
>
>
> > Thanks,
> > Dan
> >
> > On Dec 8, 2012 3:08 AM, "Ohad Eder-Pressman" <ohadpr at gmail.com> wrote:
> >>
> >> Hi all,
> >>
> >> I'm new to NoiseBridge, the guys over at #reprap mentioned it. I'm
> >> building a Prusa Mendel I2, got (almost) all the plastic parts printed
> for
> >> me by a friend and looking for guidance on where/how to source the
> >> non-printed parts and electronics. The two printed parts I'm missing
> are one
> >> belt-clamp and one x-end-motor. I seem to have the printed parts for a
> Wade
> >> Extruder as well.
> >>
> >> Love to hear from you,
> >>
> >> Thanks
> >>
> >> -ohad
> >>
> >> _______________________________________________
> >> Noisebridge-discuss mailing list
> >> Noisebridge-discuss at lists.noisebridge.net
> >> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >>
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20121217/203cd8e2/attachment-0003.html>