[Noisebridge-discuss] PCB prototype manufacturing

[Jonathan Toomim]

Let me clarify: what's the DIY-manufacturing method you've had the most 
success with? I don't want to wait more than a couple of days, and I 
don't want to pay more than $20. (Besides, Seeed is on vacation for the 
Chinese Spring Festival.)

On 1/21/2012 10:22 PM, Casey Callendrello wrote:
> seeed studios!
> http://www.seeedstudio.com/depot/fusion-pcb-service-p-835.html
>
> On 1/21/12 9:07 PM, Jonathan Toomim wrote:
>> Hey folks. I've got a PCB design that I'd like to make a prototype of.
>> It's a pretty simple design: single sided, 20 mil traces, 15 mil
>> separation between traces, 3"x.8". I made one version of this board
>> already at Crash Space using the toner transfer method, but I'd like to
>> make another revision. What's the method you've had the most success
>> with here at Noisebridge?
>>
>> Oh, by the way: Hi. I'm Jonathan. I usually live in Los Angeles, but I'm
>> trying to spend more time in (and eventually move to) the bay area. I
>> can be recognized by my (currently short) red hair and my mindreading
>> headband.
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>