[Noisebridge-discuss] Noisebridge-discuss Digest, Vol 53, Issue 17

Matt Joyce matt at nycresistor.com
Mon Mar 19 23:03:25 UTC 2012


Where is the list for racist jokes?

I love racist jokes.  Did anyone see the Paddy's day 30 rock?  That
shit was hilarious.

2012/3/19 daravinne <daravinne at gmail.com>:
> http://mistwoodlabs.redisis.net  HMMMM
>
>
>
> 2012/3/19 Rachel McConnell <rachel at xtreme.com>
>>
>> The purpose of the list is absolutely NOT for sending racist jokes. Please
>> don't use it for that any more.
>>
>> -Rachel
>>
>> On Mar 18, 2012, at 13:01, Mistwood Laboratories <mistwoodlabs at gmail.com>
>> wrote:
>>
>> so im guessing this mailing list dosent have any functionality??? it just
>> sends out what was or mabey what may be talked about today???? what is the
>> purpose of the mailing list so im not confused.
>>
>> Also a great joke.
>> What is the definition of Confused???
>> Father's Day in Harlem
>> OR
>> Oakland
>>
>> On Sat, Mar 17, 2012 at 12:00 PM,
>> <noisebridge-discuss-request at lists.noisebridge.net> wrote:
>>>
>>> Send Noisebridge-discuss mailing list submissions to
>>>        noisebridge-discuss at lists.noisebridge.net
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>        https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>> or, via email, send a message with subject or body 'help' to
>>>        noisebridge-discuss-request at lists.noisebridge.net
>>>
>>> You can reach the person managing the list at
>>>        noisebridge-discuss-owner at lists.noisebridge.net
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of Noisebridge-discuss digest..."
>>>
>>> Today's Topics:
>>>
>>>   1. SF Analog Circuits group! (Michael Prados)
>>>   2. Re: Laser engraver needs to go back in the DJ     booth
>>>      (Corey McGuire)
>>>   3. Re: Laser engraver needs to go back in the DJ     booth
>>>      (William Sargent)
>>>   4. Anyone going to Creators Project tomorrow? (daravinne)
>>>   5. Re: Looking for a very small DC generator (Jake)
>>>   6. know anyone in Frankfurt / CCC? (Kelly)
>>>   7. Private Manning vs. Staff Sgt. Robert Bales (Jake)
>>>   8. Re: Private Manning vs. Staff Sgt. Robert Bales
>>>      (Tony Longshanks LeTigre)
>>>   9. Re: Private Manning vs. Staff Sgt. Robert Bales
>>>      (Gopiballava Flaherty)
>>>  10. Re: Android Phone with only 220mb internal        memory (Kirk Lau)
>>>  11. WeKnow - Noisebridge's collective knowledge       in wiki form
>>> (Jake)
>>>  12. weknow knowledge base (Jake)
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Michael Prados <mprados at gmail.com>
>>> To: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 12:07:35 -0700
>>> Subject: [Noisebridge-discuss] SF Analog Circuits group!
>>> Hi All,
>>>
>>> Some of you may be familiar with SF Microcontrollers, an informal group
>>> that meets occasionally to discuss microcontroller projects, which also has
>>> a useful email list:
>>>
>>> http://tech.groups.yahoo.com/group/SFmicrocontrollers/
>>>
>>> Lately, after noticing a lot of traffic related to circuit design,
>>> especially analog circuits, this group has budded a new offshoot devoted to
>>> this topic:
>>>
>>> http://groups.google.com/group/sfanalogcircuits
>>>
>>> If you are interested in analog circuits, and have interesting problems
>>> or interesting solutions, please sign up!  Personally, I see this as a
>>> potentially very useful online resource, and a good way to organize
>>> occasional meetings as well.  Among other things, we could talk about noise
>>> bridges!
>>>
>>> We now return you to your regularly scheduled distractions,
>>> -Mike
>>>
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Corey McGuire <coreyfro at coreyfro.com>
>>> To: Jeff Tchang <jeff.tchang at gmail.com>
>>> Cc: NoiseBridge Discuss <Noisebridge-discuss at lists.noisebridge.net>
>>> Date: Fri, 16 Mar 2012 14:05:53 -0700
>>> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the
>>> DJ booth
>>> People are engraving and cutting particle board and plywood, which smokes
>>> a ton, fills up the room, and is full of vaporized formaldehyde...
>>>
>>> ...so...yeah...fun shit
>>>
>>> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com>
>>> wrote:
>>>>
>>>> Did someone try to engrave ABS?
>>>>
>>>> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
>>>> <gian.pablo at gmail.com> wrote:
>>>> > +1
>>>> >
>>>> > I remember a lot of effort went into prepping that room for the laser.
>>>> >
>>>> >
>>>> >
>>>> > On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com>
>>>> > wrote:
>>>> >
>>>> > No, we should not put the Electron microscope in the DJ booth.  We
>>>> > should
>>>> > not prioritize some prime real-estate for something few, if anyone,
>>>> > will
>>>> > use.
>>>> >
>>>> > We NEED to put the laser engraver BACK in the DJ booth because we need
>>>> > to
>>>> > put it in a room where the pollutants that escape it can easily be
>>>> > evacuated
>>>> > outside, easily, with a huge array of fans.
>>>> >
>>>> > WHY?!?!?!?!?
>>>> >
>>>> > Because people will laser engrave shit in it that is POISONOUS!  We
>>>> > need to
>>>> > put the laser engraver someplace where we can control it's fumes.
>>>> >
>>>> > Not only that, we need to keep the ducting as short as possible to
>>>> > evacuate
>>>> > smoke more quickly to improve cutting.  Smoke in the chamber means
>>>> > smoke in
>>>> > the beam.  Smoke in the beam means diffused energy.  Diffused energy
>>>> > means
>>>> > weak cutting.  This will also mean the optics will foul more quickly.
>>>> >
>>>> > I have told this to a bunch of people individually, but they are still
>>>> > ignoring it.  So now I am making a stink...
>>>> >
>>>> > ...before idiots start stinking up Noisebridge with cyanide from laser
>>>> > engraving ABS
>>>> >
>>>> > Please, don't be idiots.  Put...the laser...back.
>>>> >
>>>> > _______________________________________________
>>>> > Noisebridge-discuss mailing list
>>>> > Noisebridge-discuss at lists.noisebridge.net
>>>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > Noisebridge-discuss mailing list
>>>> > Noisebridge-discuss at lists.noisebridge.net
>>>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> >
>>>
>>>
>>>
>>>
>>> --
>>> Everything should be made as simple as possible, but no simpler - Albert
>>> Einstein
>>> Simplicity is the ultimate sophistication - Leonardo Da Vinci
>>> Perfection is reached not when there is nothing left to add, but when
>>> there is nothing left to take away - Antoine de Saint Exupéry
>>> Keep It Simple Stupid - Kelly Johnson
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: William Sargent <will.sargent at gmail.com>
>>> To: Corey McGuire <coreyfro at coreyfro.com>
>>> Cc: Jeff Tchang <jeff.tchang at gmail.com>, NoiseBridge Discuss
>>> <Noisebridge-discuss at lists.noisebridge.net>
>>> Date: Fri, 16 Mar 2012 14:14:16 -0700
>>> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the
>>> DJ booth
>>> a) It smells TERRIBLE.
>>> b) It makes me think I'm getting cancer just by breathing it.
>>>
>>> Please move it some place it's not killing us, kthxbye.
>>>
>>> Will.
>>>
>>> On Mar 16, 2012, at 2:05 PM, Corey McGuire wrote:
>>>
>>> People are engraving and cutting particle board and plywood, which smokes
>>> a ton, fills up the room, and is full of vaporized formaldehyde...
>>>
>>> ...so...yeah...fun shit
>>>
>>> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com>
>>> wrote:
>>>>
>>>> Did someone try to engrave ABS?
>>>>
>>>> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
>>>> <gian.pablo at gmail.com> wrote:
>>>> > +1
>>>> >
>>>> > I remember a lot of effort went into prepping that room for the laser.
>>>> >
>>>> >
>>>> >
>>>> > On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com>
>>>> > wrote:
>>>> >
>>>> > No, we should not put the Electron microscope in the DJ booth.  We
>>>> > should
>>>> > not prioritize some prime real-estate for something few, if anyone,
>>>> > will
>>>> > use.
>>>> >
>>>> > We NEED to put the laser engraver BACK in the DJ booth because we need
>>>> > to
>>>> > put it in a room where the pollutants that escape it can easily be
>>>> > evacuated
>>>> > outside, easily, with a huge array of fans.
>>>> >
>>>> > WHY?!?!?!?!?
>>>> >
>>>> > Because people will laser engrave shit in it that is POISONOUS!  We
>>>> > need to
>>>> > put the laser engraver someplace where we can control it's fumes.
>>>> >
>>>> > Not only that, we need to keep the ducting as short as possible to
>>>> > evacuate
>>>> > smoke more quickly to improve cutting.  Smoke in the chamber means
>>>> > smoke in
>>>> > the beam.  Smoke in the beam means diffused energy.  Diffused energy
>>>> > means
>>>> > weak cutting.  This will also mean the optics will foul more quickly.
>>>> >
>>>> > I have told this to a bunch of people individually, but they are still
>>>> > ignoring it.  So now I am making a stink...
>>>> >
>>>> > ...before idiots start stinking up Noisebridge with cyanide from laser
>>>> > engraving ABS
>>>> >
>>>> > Please, don't be idiots.  Put...the laser...back.
>>>> >
>>>> > _______________________________________________
>>>> > Noisebridge-discuss mailing list
>>>> > Noisebridge-discuss at lists.noisebridge.net
>>>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > Noisebridge-discuss mailing list
>>>> > Noisebridge-discuss at lists.noisebridge.net
>>>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>> >
>>>
>>>
>>>
>>>
>>> --
>>> Everything should be made as simple as possible, but no simpler - Albert
>>> Einstein
>>> Simplicity is the ultimate sophistication - Leonardo Da Vinci
>>> Perfection is reached not when there is nothing left to add, but when
>>> there is nothing left to take away - Antoine de Saint Exupéry
>>> Keep It Simple Stupid - Kelly Johnson
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: daravinne <daravinne at gmail.com>
>>> To: noisebridge-discuss Discuss
>>> <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 14:21:27 -0700
>>> Subject: [Noisebridge-discuss] Anyone going to Creators Project tomorrow?
>>> I managed to get picked for a last minute ticket for The Creators'
>>> Project tomorrow:  http://www.eventbrite.com/event/3017205543  Is anyone
>>> else going?  Tomorrow is the ticket-only part, Sunday is when it's open to
>>> the general public.
>>>
>>> ---------- Forwarded message ----------
>>> From: Jake <jake at spaz.org>
>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>> <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 16:48:07 -0700 (PDT)
>>> Subject: Re: [Noisebridge-discuss] Looking for a very small DC generator
>>> I think you're looking for vibrators from cellphones or pagers.
>>>
>>> -jake
>>>
>>> Sean wrote:
>>>
>>> I'm looking for a component for my project that's proving difficult to
>>> find.  I'm hoping maybe someone could point me in the right direction.
>>>
>>> I'm looking for a very small DC generator (or motor to be used as a
>>> generator) with the following specs:
>>> - The thinnest dimension has to be less than about 6mm (a vertical shaft
>>> ("pancake") orientation is preferred, but I might be able to use a
>>> horizontal shaft motor.)
>>> - It needs to produce about 250mW at a speed of less than 500RPM
>>> - Output voltage of 3-5V is ideal
>>>
>>> Any suggestions are much appreciated!
>>>
>>> - Sean
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Kelly <hurtstotouchfire at gmail.com>
>>> To: Noisebridge <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Sat, 17 Mar 2012 01:35:59 +0100
>>> Subject: [Noisebridge-discuss] know anyone in Frankfurt / CCC?
>>> I'd like to visit the CCC here in Frankfurt, but their website is
>>> pretty sketchy on the contact options. Anyone know somebody I could
>>> ping? I am here for the weekend and fly back to SF on Monday. Just in
>>> time for our beloved meeting...
>>>
>>> -Kelly
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Jake <jake at spaz.org>
>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>> <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 18:14:48 -0700 (PDT)
>>> Subject: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>> Bales
>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>> (most of them children)
>>>
>>> from the comments:
>>>
>>> It will be interesting to compare how the military treats this individual
>>> compared to how Private Manning is being treated. It will demonstrate which
>>> crime they think is more serious.
>>>
>>> the story:
>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>
>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Tony Longshanks LeTigre <anthonyletigre at gmail.com>
>>> To: Jake <jake at spaz.org>
>>> Cc: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>> Date: Fri, 16 Mar 2012 18:20:47 -0700
>>> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>> Bales
>>> Place your bets now, folks....
>>>
>>> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
>>>>
>>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>>> (most of them children)
>>>>
>>>> from the comments:
>>>>
>>>> It will be interesting to compare how the military treats this
>>>> individual
>>>> compared to how Private Manning is being treated. It will demonstrate
>>>> which crime they think is more serious.
>>>>
>>>> the story:
>>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>>
>>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Gopiballava Flaherty <gopiballava at gmail.com>
>>> To: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 20:08:33 -0600
>>> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert
>>> Bales
>>> A) Didn't they recently plea bargain some guys who killed people?
>>> B) There are too many feedback loops in here. The appearance of
>>> priorities is a feedback loop. Nobody wants to be seen to care more about
>>> embarrassment than murder.
>>>
>>> Thanks,
>>>
>>> gopi at iPad
>>>
>>> On Mar 16, 2012, at 19:20, Tony Longshanks LeTigre
>>> <anthonyletigre at gmail.com> wrote:
>>>
>>> Place your bets now, folks....
>>>
>>> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
>>>>
>>>> regarding the US Army guy who killed 16 afghan civilians in the night
>>>> (most of them children)
>>>>
>>>> from the comments:
>>>>
>>>> It will be interesting to compare how the military treats this
>>>> individual
>>>> compared to how Private Manning is being treated. It will demonstrate
>>>> which crime they think is more serious.
>>>>
>>>> the story:
>>>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>>>>
>>>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>>>> _______________________________________________
>>>> Noisebridge-discuss mailing list
>>>> Noisebridge-discuss at lists.noisebridge.net
>>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>>
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Kirk Lau <kirk1978 at gmail.com>
>>> To: xinchejian at googlegroups.com
>>> Cc: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
>>> Date: Fri, 16 Mar 2012 20:53:42 +0800
>>> Subject: Re: [Noisebridge-discuss] Android Phone with only 220mb internal
>>> memory
>>> in your phone, go to your contact, and press the menu key,
>>> u have option of which group of contact to sync
>>> choose the group you want..
>>>
>>> 2012/3/16 Jeff Rust <jsmtechnologies at gmail.com>:
>>> > I have a problem with my phone saying memory full if I sync google
>>> > contacts.
>>> > I used to have only 4,000 contacts now that google plus has added all
>>> > circled people to g contacts I have over 10,000 !!! WTF
>>> > It takes over 110mb of my only 220mb of internal storage. I am trying
>>> > to
>>> > find a way to sync google calendar,contacts, mail to my sd instead of
>>> > the
>>> > phone. It would also be great if I can do that with my sms/mms messages
>>> > as
>>> > well.
>>> >
>>> > I would love to be able to sync my new sd/sim contacts back to google
>>> > as
>>> > well.
>>> >
>>> > Let me know what you think. My email is jsmtechnologies at gmail.com
>>> >
>>> > Thanks again for your consideration.
>>> >
>>> > 2012/3/16 <xinchejian at googlegroups.com>
>>> >>
>>> >>   Today's Topic Summary
>>> >>
>>> >> Group: http://groups.google.com/group/xinchejian/topics
>>> >>
>>> >> about Exhibition [3 Updates]
>>> >> Accessing the kinect from your browser [4 Updates]
>>> >> SD card question [3 Updates]
>>> >> 本周日:教育性机器人演示 - This Sunday: Educational Robots show case [1 Update]
>>> >>
>>> >>  about Exhibition
>>> >>
>>> >> Infy Zhang <infyzhang at gmail.com> Mar 16 11:13AM +0800
>>> >>
>>> >> They send me this.I don't think I should say that.
>>> >> I told them Ricky ,Minnin and David are the founder.
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> David Li <taweili at gmail.com> Mar 16 04:09PM +0800
>>> >>
>>> >> :D Now, that's a good question. However, who's Ultra realistic anyway?
>>> >>
>>> >> On Mar 15, 2012, at 5:57 PM, Paul Adams wrote:
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> Paul Adams <nihaopaul at gmail.com> Mar 16 04:10PM +0800
>>> >>
>>> >> lol woops, that was supposed to be a private message :/
>>> >>
>>> >> On Fri Mar 16 16:09:01 2012, David Li wrote:
>>> >>
>>> >>
>>> >>
>>> >>  Accessing the kinect from your browser
>>> >>
>>> >> Johnny <seatubers at gmail.com> Mar 16 01:25AM -0400
>>> >>
>>> >> http://zigfu.com/
>>> >>
>>> >> Not much to say except it works and it is awesome.
>>> >>
>>> >> As a side note, has anyone seen any good implementations of 3d
>>> >> scanning
>>> >> through depth from focus/defocus algorithms? I've been cobbling
>>> >> together
>>> >> something of my own, but I'm wondering if there's already something
>>> >> out
>>> >> there that's already good to go.
>>> >>
>>> >>
>>> >>
>>> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:55PM +0800
>>> >>
>>> >> Cool but I do not have a Kinec yet :-)
>>> >>
>>> >> About your note: see this. http://www.youtube.com/watch?v=jLZ-s9KRzG8
>>> >> Not sure if you can get some answer there but it's pretty amazing and
>>> >> cheap. 3D scanner for less than 25 US$
>>> >>
>>> >> ~Lutz
>>> >>
>>> >>
>>> >>
>>> >> 2012/3/16 Johnny <seatubers at gmail.com>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 02:00PM +0800
>>> >>
>>> >> sorry, i forgot the important thing:
>>> >> the code: http://code.google.com/p/rp-3d-scanner/
>>> >>
>>> >> ~Lutz
>>> >>
>>> >>
>>> >> 2012/3/16 萨克森气势 <sachsenpower at gmail.com>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> Paul Adams <nihaopaul at gmail.com> Mar 16 02:00PM +0800
>>> >>
>>> >> edward and somone was playing with a simplier one of these in XCj a
>>> >> few
>>> >> weeks ago: http://www.youtube.com/watch?v=uC-99bjh2dE&feature=related
>>> >>
>>> >> On Fri Mar 16 13:55:48 2012, 萨克森气势 wrote:
>>> >>
>>> >>
>>> >>
>>> >>  SD card question
>>> >>
>>> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:15PM +0800
>>> >>
>>> >> We tried different card readers and also different recovery software.
>>> >> That's why I am asking for a different solution. I mean, there have to
>>> >> be
>>> >> a
>>> >> way to access the memory without or with an external controller, if
>>> >> that
>>> >> is
>>> >> the issue.
>>> >>
>>> >> ~Lutz
>>> >>
>>> >>
>>> >> 2012/3/15 James Koler <jameshkoler at gmail.com>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >> ourstuff888 <ourstuff888 at gmail.com> Mar 16 01:24PM +0800
>>> >>
>>> >> If you can get to the innards and access the chip pins, then maybe
>>> >> something like this BusPirate can help. It would also help if there
>>> >> are
>>> >> visible markings on the chips.
>>> >>
>>> >> See http://dangerousprototypes.com/docs/Bus_Pirate.
>>> >>
>>> >> There are some chip examples here:
>>> >> http://dangerousprototypes.com/docs/Bus_Pirate#Chip_demonstrations,
>>> >> that
>>> >> show how to access some memory & other chips.
>>> >>
>>> >> There are plenty more examples in the forums where people have reverse
>>> >> engineered stuff and quite a few who half fixed corrupt computer BIOS
>>> >> etc.
>>> >>
>>> >> I have one and can give you an intro and lend it to you if you want to
>>> >> try it.
>>> >>
>>> >> Spencer
>>> >>
>>> >> On 16/03/12 13:15, 萨克森气势 wrote:
>>> >>
>>> >>
>>> >>
>>> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:46PM +0800
>>> >>
>>> >> Thanks Spencer, i will check this and come back to you :-) That's very
>>> >> helpful since I really think there is a hardware problem.
>>> >>
>>> >> ~Lutz
>>> >>
>>> >>
>>> >>
>>> >> 2012/3/16 ourstuff888 <ourstuff888 at gmail.com>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>  本周日:教育性机器人演示 - This Sunday: Educational Robots show case
>>> >>
>>> >> Min Lin Hsieh <mlhsie at gmail.com> Mar 16 12:21AM +0800
>>> >>
>>> >> 本周日下午2点:教育性机器人演示, 欢迎大小朋友来围观!免费入场喔!
>>> >>
>>> >> 详情:http://xinchejian.com/event/?ee=115
>>> >>
>>> >>
>>> >> This Sunday 2pm at XinCheJian (FREE): Educational Robots show case
>>> >>
>>> >> More details here: http://xinchejian.com/event/?ee=115
>>> >>
>>> >>
>>> >>
>>> >> You received this message because you are subscribed to the Google
>>> >> Group
>>> >> xinchejian.
>>> >> You can post via email.
>>> >> To unsubscribe from this group, send an empty message.
>>> >> For more options, visit this group.
>>> >
>>> >
>>> >
>>> >
>>> > --
>>> >
>>> > --
>>> > Sincerely,
>>> > Jeffrey Scott Rust 胡佳豪
>>> >
>>> > USA  1-585-210-2117
>>> > China +86-14782102042
>>> > International QQ Messenger ID 1261660352 http://im.qq.com/
>>> >
>>> > Profile and Wiki
>>> > https://plus.google.com/108631784091775380095
>>> > http://ccnetwork.wikispaces.com/   review all pages please
>>> >
>>> > Favorite Projects
>>> > earthship.net
>>> > http://opensourceecology.org/wiki/Main_Page
>>> > http://www.windowfarms.org/buildyourown
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Jake <jake at spaz.org>
>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>> <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Fri, 16 Mar 2012 23:56:09 -0700 (PDT)
>>> Subject: [Noisebridge-discuss] WeKnow - Noisebridge's collective
>>> knowledge in wiki form
>>> if you go to
>>> https://noisebridge.net/wiki/Weknow
>>>
>>> you will see a new page dedicated to categorizing Knowledge held by the
>>> members of the Noisebridge community.
>>>
>>> it's starting out just as a template, but anyone with input to this
>>> concept should jump right in.
>>>
>>> I put a bunch of stuff about Arduino and Jesse is adding stuff about
>>> source control and Git, and trying to get the "keep answer hidden until
>>> clicked upon" function to work in mediawiki.
>>>
>>> -jake
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Jake <jake at spaz.org>
>>> To: "noisebridge-discuss at lists.noisebridge.net"
>>> <noisebridge-discuss at lists.noisebridge.net>
>>> Cc:
>>> Date: Sat, 17 Mar 2012 01:12:52 -0700 (PDT)
>>> Subject: [Noisebridge-discuss] weknow knowledge base
>>> Hello knowledgeable person,
>>>
>>> so we've made this new wiki page with knowledge of several disciplines.
>>> The purpose of it is to allow people to find out how much they know (and
>>> what there is to know), so that they can learn more.  Also, hopefully there
>>> will be links to people who know things, so that people wanting to learn
>>> more can know who to ask.
>>>
>>> In each category, we are putting a list of quiz-like questions which have
>>> corresponding answers.  I think the goal should be to have information about
>>> these topics in a question-and-answer format so that people can
>>>
>>> I have created a few categories, including:
>>> 2.1 Arduino Quiz Questions
>>> 2.2 Soldering
>>> 2.3 Electronic Components
>>> 2.4 Replicators and MakerBots
>>> 2.5 Sewing
>>> 2.6 Cooking
>>> 2.7 Version Control / Source Control
>>>
>>> These are topics that I think you know a lot about.  I was hoping you
>>> could edit the wiki and put questions and answers in there to help this
>>> thing along.  Eventually, everything known by anyone at noisebridge will be
>>> on this page (or maybe it will expand to multiple pages) and people will be
>>> able to instantly orient themselves relative to what there is to know.
>>>
>>> All the questions I created are essay-style, with multiple answers
>>> listed. The person grading themself (or someone else) can simply learn from
>>> their answers, or assign a percentage score to each answer to tabulate a
>>> score in a particular subject.  People knowledgable in these fields can add
>>> answers to increase the chance that someone will learn from a question, and
>>> increase the chance that their right answer will correspond to one already
>>> listed.
>>>
>>> so please - get on the wiki and edit away!
>>>
>>> https://noisebridge.net/wiki/Weknow
>>>
>>>
>>> _______________________________________________
>>> Noisebridge-discuss mailing list
>>> Noisebridge-discuss at lists.noisebridge.net
>>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>>
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>



More information about the Noisebridge-discuss mailing list