[Noisebridge-discuss] Noisebridge-discuss Digest, Vol 53, Issue 17
Rachel McConnell
rachel at xtreme.com
Mon Mar 19 22:54:34 UTC 2012
The purpose of the list is absolutely NOT for sending racist jokes. Please don't use it for that any more.
-Rachel
On Mar 18, 2012, at 13:01, Mistwood Laboratories <mistwoodlabs at gmail.com> wrote:
> so im guessing this mailing list dosent have any functionality??? it just sends out what was or mabey what may be talked about today???? what is the purpose of the mailing list so im not confused.
>
> Also a great joke.
> What is the definition of Confused???
> Father's Day in Harlem
> OR
> Oakland
>
> On Sat, Mar 17, 2012 at 12:00 PM, <noisebridge-discuss-request at lists.noisebridge.net> wrote:
> Send Noisebridge-discuss mailing list submissions to
> noisebridge-discuss at lists.noisebridge.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> or, via email, send a message with subject or body 'help' to
> noisebridge-discuss-request at lists.noisebridge.net
>
> You can reach the person managing the list at
> noisebridge-discuss-owner at lists.noisebridge.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Noisebridge-discuss digest..."
>
> Today's Topics:
>
> 1. SF Analog Circuits group! (Michael Prados)
> 2. Re: Laser engraver needs to go back in the DJ booth
> (Corey McGuire)
> 3. Re: Laser engraver needs to go back in the DJ booth
> (William Sargent)
> 4. Anyone going to Creators Project tomorrow? (daravinne)
> 5. Re: Looking for a very small DC generator (Jake)
> 6. know anyone in Frankfurt / CCC? (Kelly)
> 7. Private Manning vs. Staff Sgt. Robert Bales (Jake)
> 8. Re: Private Manning vs. Staff Sgt. Robert Bales
> (Tony Longshanks LeTigre)
> 9. Re: Private Manning vs. Staff Sgt. Robert Bales
> (Gopiballava Flaherty)
> 10. Re: Android Phone with only 220mb internal memory (Kirk Lau)
> 11. WeKnow - Noisebridge's collective knowledge in wiki form (Jake)
> 12. weknow knowledge base (Jake)
>
>
> ---------- Forwarded message ----------
> From: Michael Prados <mprados at gmail.com>
> To: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 12:07:35 -0700
> Subject: [Noisebridge-discuss] SF Analog Circuits group!
> Hi All,
>
> Some of you may be familiar with SF Microcontrollers, an informal group that meets occasionally to discuss microcontroller projects, which also has a useful email list:
>
> http://tech.groups.yahoo.com/group/SFmicrocontrollers/
>
> Lately, after noticing a lot of traffic related to circuit design, especially analog circuits, this group has budded a new offshoot devoted to this topic:
>
> http://groups.google.com/group/sfanalogcircuits
>
> If you are interested in analog circuits, and have interesting problems or interesting solutions, please sign up! Personally, I see this as a potentially very useful online resource, and a good way to organize occasional meetings as well. Among other things, we could talk about noise bridges!
>
> We now return you to your regularly scheduled distractions,
> -Mike
>
>
>
>
>
> ---------- Forwarded message ----------
> From: Corey McGuire <coreyfro at coreyfro.com>
> To: Jeff Tchang <jeff.tchang at gmail.com>
> Cc: NoiseBridge Discuss <Noisebridge-discuss at lists.noisebridge.net>
> Date: Fri, 16 Mar 2012 14:05:53 -0700
> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the DJ booth
> People are engraving and cutting particle board and plywood, which smokes a ton, fills up the room, and is full of vaporized formaldehyde...
>
> ...so...yeah...fun shit
>
> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com> wrote:
> Did someone try to engrave ABS?
>
> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
> <gian.pablo at gmail.com> wrote:
> > +1
> >
> > I remember a lot of effort went into prepping that room for the laser.
> >
> >
> >
> > On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com> wrote:
> >
> > No, we should not put the Electron microscope in the DJ booth. We should
> > not prioritize some prime real-estate for something few, if anyone, will
> > use.
> >
> > We NEED to put the laser engraver BACK in the DJ booth because we need to
> > put it in a room where the pollutants that escape it can easily be evacuated
> > outside, easily, with a huge array of fans.
> >
> > WHY?!?!?!?!?
> >
> > Because people will laser engrave shit in it that is POISONOUS! We need to
> > put the laser engraver someplace where we can control it's fumes.
> >
> > Not only that, we need to keep the ducting as short as possible to evacuate
> > smoke more quickly to improve cutting. Smoke in the chamber means smoke in
> > the beam. Smoke in the beam means diffused energy. Diffused energy means
> > weak cutting. This will also mean the optics will foul more quickly.
> >
> > I have told this to a bunch of people individually, but they are still
> > ignoring it. So now I am making a stink...
> >
> > ...before idiots start stinking up Noisebridge with cyanide from laser
> > engraving ABS
> >
> > Please, don't be idiots. Put...the laser...back.
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
> >
> > _______________________________________________
> > Noisebridge-discuss mailing list
> > Noisebridge-discuss at lists.noisebridge.net
> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
> >
>
>
>
> --
> Everything should be made as simple as possible, but no simpler - Albert Einstein
> Simplicity is the ultimate sophistication - Leonardo Da Vinci
> Perfection is reached not when there is nothing left to add, but when there is nothing left to take away - Antoine de Saint Exupéry
> Keep It Simple Stupid - Kelly Johnson
>
>
> ---------- Forwarded message ----------
> From: William Sargent <will.sargent at gmail.com>
> To: Corey McGuire <coreyfro at coreyfro.com>
> Cc: Jeff Tchang <jeff.tchang at gmail.com>, NoiseBridge Discuss <Noisebridge-discuss at lists.noisebridge.net>
> Date: Fri, 16 Mar 2012 14:14:16 -0700
> Subject: Re: [Noisebridge-discuss] Laser engraver needs to go back in the DJ booth
> a) It smells TERRIBLE.
> b) It makes me think I'm getting cancer just by breathing it.
>
> Please move it some place it's not killing us, kthxbye.
>
> Will.
>
> On Mar 16, 2012, at 2:05 PM, Corey McGuire wrote:
>
>> People are engraving and cutting particle board and plywood, which smokes a ton, fills up the room, and is full of vaporized formaldehyde...
>>
>> ...so...yeah...fun shit
>>
>> On Fri, Mar 16, 2012 at 10:13 AM, Jeff Tchang <jeff.tchang at gmail.com> wrote:
>> Did someone try to engrave ABS?
>>
>> On Fri, Mar 16, 2012 at 7:54 AM, Gian Pablo Villamil
>> <gian.pablo at gmail.com> wrote:
>> > +1
>> >
>> > I remember a lot of effort went into prepping that room for the laser.
>> >
>> >
>> >
>> > On Mar 14, 2012, at 9:32 PM, Corey McGuire <coreyfro at coreyfro.com> wrote:
>> >
>> > No, we should not put the Electron microscope in the DJ booth. We should
>> > not prioritize some prime real-estate for something few, if anyone, will
>> > use.
>> >
>> > We NEED to put the laser engraver BACK in the DJ booth because we need to
>> > put it in a room where the pollutants that escape it can easily be evacuated
>> > outside, easily, with a huge array of fans.
>> >
>> > WHY?!?!?!?!?
>> >
>> > Because people will laser engrave shit in it that is POISONOUS! We need to
>> > put the laser engraver someplace where we can control it's fumes.
>> >
>> > Not only that, we need to keep the ducting as short as possible to evacuate
>> > smoke more quickly to improve cutting. Smoke in the chamber means smoke in
>> > the beam. Smoke in the beam means diffused energy. Diffused energy means
>> > weak cutting. This will also mean the optics will foul more quickly.
>> >
>> > I have told this to a bunch of people individually, but they are still
>> > ignoring it. So now I am making a stink...
>> >
>> > ...before idiots start stinking up Noisebridge with cyanide from laser
>> > engraving ABS
>> >
>> > Please, don't be idiots. Put...the laser...back.
>> >
>> > _______________________________________________
>> > Noisebridge-discuss mailing list
>> > Noisebridge-discuss at lists.noisebridge.net
>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>> >
>> >
>> > _______________________________________________
>> > Noisebridge-discuss mailing list
>> > Noisebridge-discuss at lists.noisebridge.net
>> > https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>> >
>>
>>
>>
>> --
>> Everything should be made as simple as possible, but no simpler - Albert Einstein
>> Simplicity is the ultimate sophistication - Leonardo Da Vinci
>> Perfection is reached not when there is nothing left to add, but when there is nothing left to take away - Antoine de Saint Exupéry
>> Keep It Simple Stupid - Kelly Johnson
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
> ---------- Forwarded message ----------
> From: daravinne <daravinne at gmail.com>
> To: noisebridge-discuss Discuss <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 14:21:27 -0700
> Subject: [Noisebridge-discuss] Anyone going to Creators Project tomorrow?
> I managed to get picked for a last minute ticket for The Creators' Project tomorrow: http://www.eventbrite.com/event/3017205543 Is anyone else going? Tomorrow is the ticket-only part, Sunday is when it's open to the general public.
>
> ---------- Forwarded message ----------
> From: Jake <jake at spaz.org>
> To: "noisebridge-discuss at lists.noisebridge.net" <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 16:48:07 -0700 (PDT)
> Subject: Re: [Noisebridge-discuss] Looking for a very small DC generator
> I think you're looking for vibrators from cellphones or pagers.
>
> -jake
>
> Sean wrote:
>
> I'm looking for a component for my project that's proving difficult to
> find. I'm hoping maybe someone could point me in the right direction.
>
> I'm looking for a very small DC generator (or motor to be used as a
> generator) with the following specs:
> - The thinnest dimension has to be less than about 6mm (a vertical shaft
> ("pancake") orientation is preferred, but I might be able to use a
> horizontal shaft motor.)
> - It needs to produce about 250mW at a speed of less than 500RPM
> - Output voltage of 3-5V is ideal
>
> Any suggestions are much appreciated!
>
> - Sean
>
>
>
> ---------- Forwarded message ----------
> From: Kelly <hurtstotouchfire at gmail.com>
> To: Noisebridge <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Sat, 17 Mar 2012 01:35:59 +0100
> Subject: [Noisebridge-discuss] know anyone in Frankfurt / CCC?
> I'd like to visit the CCC here in Frankfurt, but their website is
> pretty sketchy on the contact options. Anyone know somebody I could
> ping? I am here for the weekend and fly back to SF on Monday. Just in
> time for our beloved meeting...
>
> -Kelly
>
>
>
> ---------- Forwarded message ----------
> From: Jake <jake at spaz.org>
> To: "noisebridge-discuss at lists.noisebridge.net" <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 18:14:48 -0700 (PDT)
> Subject: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert Bales
> regarding the US Army guy who killed 16 afghan civilians in the night (most of them children)
>
> from the comments:
>
> It will be interesting to compare how the military treats this individual compared to how Private Manning is being treated. It will demonstrate which crime they think is more serious.
>
> the story:
> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>
>
>
> ---------- Forwarded message ----------
> From: Tony Longshanks LeTigre <anthonyletigre at gmail.com>
> To: Jake <jake at spaz.org>
> Cc: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
> Date: Fri, 16 Mar 2012 18:20:47 -0700
> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert Bales
> Place your bets now, folks....
>
> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
> regarding the US Army guy who killed 16 afghan civilians in the night
> (most of them children)
>
> from the comments:
>
> It will be interesting to compare how the military treats this individual
> compared to how Private Manning is being treated. It will demonstrate
> which crime they think is more serious.
>
> the story:
> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
>
> ---------- Forwarded message ----------
> From: Gopiballava Flaherty <gopiballava at gmail.com>
> To: Noisebridge Discuss <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 20:08:33 -0600
> Subject: Re: [Noisebridge-discuss] Private Manning vs. Staff Sgt. Robert Bales
> A) Didn't they recently plea bargain some guys who killed people?
> B) There are too many feedback loops in here. The appearance of priorities is a feedback loop. Nobody wants to be seen to care more about embarrassment than murder.
>
> Thanks,
>
> gopi at iPad
>
> On Mar 16, 2012, at 19:20, Tony Longshanks LeTigre <anthonyletigre at gmail.com> wrote:
>
>> Place your bets now, folks....
>>
>> On Fri, Mar 16, 2012 at 6:14 PM, Jake <jake at spaz.org> wrote:
>> regarding the US Army guy who killed 16 afghan civilians in the night
>> (most of them children)
>>
>> from the comments:
>>
>> It will be interesting to compare how the military treats this individual
>> compared to how Private Manning is being treated. It will demonstrate
>> which crime they think is more serious.
>>
>> the story:
>> Afghan Shooting Suspect Identified as Army Staff Sgt. Robert Bales
>> http://www.nytimes.com/2012/03/17/world/asia/afghan-shooting-suspect-identified-as-army-staff-sgt-robert-bales.html
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
> ---------- Forwarded message ----------
> From: Kirk Lau <kirk1978 at gmail.com>
> To: xinchejian at googlegroups.com
> Cc: NoiseBridge Discuss <noisebridge-discuss at lists.noisebridge.net>
> Date: Fri, 16 Mar 2012 20:53:42 +0800
> Subject: Re: [Noisebridge-discuss] Android Phone with only 220mb internal memory
> in your phone, go to your contact, and press the menu key,
> u have option of which group of contact to sync
> choose the group you want..
>
> 2012/3/16 Jeff Rust <jsmtechnologies at gmail.com>:
> > I have a problem with my phone saying memory full if I sync google contacts.
> > I used to have only 4,000 contacts now that google plus has added all
> > circled people to g contacts I have over 10,000 !!! WTF
> > It takes over 110mb of my only 220mb of internal storage. I am trying to
> > find a way to sync google calendar,contacts, mail to my sd instead of the
> > phone. It would also be great if I can do that with my sms/mms messages as
> > well.
> >
> > I would love to be able to sync my new sd/sim contacts back to google as
> > well.
> >
> > Let me know what you think. My email is jsmtechnologies at gmail.com
> >
> > Thanks again for your consideration.
> >
> > 2012/3/16 <xinchejian at googlegroups.com>
> >>
> >> Today's Topic Summary
> >>
> >> Group: http://groups.google.com/group/xinchejian/topics
> >>
> >> about Exhibition [3 Updates]
> >> Accessing the kinect from your browser [4 Updates]
> >> SD card question [3 Updates]
> >> 本周日：教育性机器人演示 - This Sunday: Educational Robots show case [1 Update]
> >>
> >> about Exhibition
> >>
> >> Infy Zhang <infyzhang at gmail.com> Mar 16 11:13AM +0800
> >>
> >> They send me this.I don't think I should say that.
> >> I told them Ricky ,Minnin and David are the founder.
> >>
> >>
> >>
> >>
> >> David Li <taweili at gmail.com> Mar 16 04:09PM +0800
> >>
> >> :D Now, that's a good question. However, who's Ultra realistic anyway?
> >>
> >> On Mar 15, 2012, at 5:57 PM, Paul Adams wrote:
> >>
> >>
> >>
> >>
> >> Paul Adams <nihaopaul at gmail.com> Mar 16 04:10PM +0800
> >>
> >> lol woops, that was supposed to be a private message :/
> >>
> >> On Fri Mar 16 16:09:01 2012, David Li wrote:
> >>
> >>
> >>
> >> Accessing the kinect from your browser
> >>
> >> Johnny <seatubers at gmail.com> Mar 16 01:25AM -0400
> >>
> >> http://zigfu.com/
> >>
> >> Not much to say except it works and it is awesome.
> >>
> >> As a side note, has anyone seen any good implementations of 3d scanning
> >> through depth from focus/defocus algorithms? I've been cobbling together
> >> something of my own, but I'm wondering if there's already something out
> >> there that's already good to go.
> >>
> >>
> >>
> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:55PM +0800
> >>
> >> Cool but I do not have a Kinec yet :-)
> >>
> >> About your note: see this. http://www.youtube.com/watch?v=jLZ-s9KRzG8
> >> Not sure if you can get some answer there but it's pretty amazing and
> >> cheap. 3D scanner for less than 25 US$
> >>
> >> ~Lutz
> >>
> >>
> >>
> >> 2012/3/16 Johnny <seatubers at gmail.com>
> >>
> >>
> >>
> >>
> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 02:00PM +0800
> >>
> >> sorry, i forgot the important thing:
> >> the code: http://code.google.com/p/rp-3d-scanner/
> >>
> >> ~Lutz
> >>
> >>
> >> 2012/3/16 萨克森气势 <sachsenpower at gmail.com>
> >>
> >>
> >>
> >>
> >> Paul Adams <nihaopaul at gmail.com> Mar 16 02:00PM +0800
> >>
> >> edward and somone was playing with a simplier one of these in XCj a few
> >> weeks ago: http://www.youtube.com/watch?v=uC-99bjh2dE&feature=related
> >>
> >> On Fri Mar 16 13:55:48 2012, 萨克森气势 wrote:
> >>
> >>
> >>
> >> SD card question
> >>
> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:15PM +0800
> >>
> >> We tried different card readers and also different recovery software.
> >> That's why I am asking for a different solution. I mean, there have to be
> >> a
> >> way to access the memory without or with an external controller, if that
> >> is
> >> the issue.
> >>
> >> ~Lutz
> >>
> >>
> >> 2012/3/15 James Koler <jameshkoler at gmail.com>
> >>
> >>
> >>
> >>
> >> ourstuff888 <ourstuff888 at gmail.com> Mar 16 01:24PM +0800
> >>
> >> If you can get to the innards and access the chip pins, then maybe
> >> something like this BusPirate can help. It would also help if there are
> >> visible markings on the chips.
> >>
> >> See http://dangerousprototypes.com/docs/Bus_Pirate.
> >>
> >> There are some chip examples here:
> >> http://dangerousprototypes.com/docs/Bus_Pirate#Chip_demonstrations, that
> >> show how to access some memory & other chips.
> >>
> >> There are plenty more examples in the forums where people have reverse
> >> engineered stuff and quite a few who half fixed corrupt computer BIOS etc.
> >>
> >> I have one and can give you an intro and lend it to you if you want to
> >> try it.
> >>
> >> Spencer
> >>
> >> On 16/03/12 13:15, 萨克森气势 wrote:
> >>
> >>
> >>
> >> 萨克森气势 <sachsenpower at gmail.com> Mar 16 01:46PM +0800
> >>
> >> Thanks Spencer, i will check this and come back to you :-) That's very
> >> helpful since I really think there is a hardware problem.
> >>
> >> ~Lutz
> >>
> >>
> >>
> >> 2012/3/16 ourstuff888 <ourstuff888 at gmail.com>
> >>
> >>
> >>
> >>
> >> 本周日：教育性机器人演示 - This Sunday: Educational Robots show case
> >>
> >> Min Lin Hsieh <mlhsie at gmail.com> Mar 16 12:21AM +0800
> >>
> >> 本周日下午2点：教育性机器人演示, 欢迎大小朋友来围观！免费入场喔！
> >>
> >> 详情：http://xinchejian.com/event/?ee=115
> >>
> >>
> >> This Sunday 2pm at XinCheJian (FREE): Educational Robots show case
> >>
> >> More details here: http://xinchejian.com/event/?ee=115
> >>
> >>
> >>
> >> You received this message because you are subscribed to the Google Group
> >> xinchejian.
> >> You can post via email.
> >> To unsubscribe from this group, send an empty message.
> >> For more options, visit this group.
> >
> >
> >
> >
> > --
> >
> > --
> > Sincerely,
> > Jeffrey Scott Rust 胡佳豪
> >
> > USA 1-585-210-2117
> > China +86-14782102042
> > International QQ Messenger ID 1261660352 http://im.qq.com/
> >
> > Profile and Wiki
> > https://plus.google.com/108631784091775380095
> > http://ccnetwork.wikispaces.com/ review all pages please
> >
> > Favorite Projects
> > earthship.net
> > http://opensourceecology.org/wiki/Main_Page
> > http://www.windowfarms.org/buildyourown
>
>
>
> ---------- Forwarded message ----------
> From: Jake <jake at spaz.org>
> To: "noisebridge-discuss at lists.noisebridge.net" <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Fri, 16 Mar 2012 23:56:09 -0700 (PDT)
> Subject: [Noisebridge-discuss] WeKnow - Noisebridge's collective knowledge in wiki form
> if you go to
> https://noisebridge.net/wiki/Weknow
>
> you will see a new page dedicated to categorizing Knowledge held by the members of the Noisebridge community.
>
> it's starting out just as a template, but anyone with input to this concept should jump right in.
>
> I put a bunch of stuff about Arduino and Jesse is adding stuff about source control and Git, and trying to get the "keep answer hidden until clicked upon" function to work in mediawiki.
>
> -jake
>
>
>
> ---------- Forwarded message ----------
> From: Jake <jake at spaz.org>
> To: "noisebridge-discuss at lists.noisebridge.net" <noisebridge-discuss at lists.noisebridge.net>
> Cc:
> Date: Sat, 17 Mar 2012 01:12:52 -0700 (PDT)
> Subject: [Noisebridge-discuss] weknow knowledge base
> Hello knowledgeable person,
>
> so we've made this new wiki page with knowledge of several disciplines. The purpose of it is to allow people to find out how much they know (and what there is to know), so that they can learn more. Also, hopefully there will be links to people who know things, so that people wanting to learn more can know who to ask.
>
> In each category, we are putting a list of quiz-like questions which have corresponding answers. I think the goal should be to have information about these topics in a question-and-answer format so that people can
>
> I have created a few categories, including:
> 2.1 Arduino Quiz Questions
> 2.2 Soldering
> 2.3 Electronic Components
> 2.4 Replicators and MakerBots
> 2.5 Sewing
> 2.6 Cooking
> 2.7 Version Control / Source Control
>
> These are topics that I think you know a lot about. I was hoping you could edit the wiki and put questions and answers in there to help this thing along. Eventually, everything known by anyone at noisebridge will be on this page (or maybe it will expand to multiple pages) and people will be able to instantly orient themselves relative to what there is to know.
>
> All the questions I created are essay-style, with multiple answers listed. The person grading themself (or someone else) can simply learn from their answers, or assign a percentage score to each answer to tabulate a score in a particular subject. People knowledgable in these fields can add answers to increase the chance that someone will learn from a question, and increase the chance that their right answer will correspond to one already listed.
>
> so please - get on the wiki and edit away!
>
> https://noisebridge.net/wiki/Weknow
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20120319/a15c4ad4/attachment-0001.html>
More information about the Noisebridge-discuss
mailing list