[Noisebridge-discuss] Laser engraver needs to go back in the DJ booth

Corey McGuire coreyfro at coreyfro.com
Fri Mar 16 04:37:40 UTC 2012

Not only does the air in the laser need evacuation, but so does the air
around it. That is why the laser needs to be in a small, enclosed space
like the dj booth... So it is easy to evacuate the air around the laser.

We already solved this problem. The only reason it was moved was because
of. The leak.

Look, the sem doesn't need air exchange. Equipment that does has Window
access priority. The sem is a novelty. It isn't a tool that will get much

Until the laser has a permanent solution, there isn't really an argument.
On Mar 15, 2012 4:59 PM, "Andy Isaacson" <adi at hexapodia.org> wrote:

> On Thu, Mar 15, 2012 at 01:03:24AM -0700, Alan Rockefeller wrote:
> > If the current exhaust system is not good enough, we can add a turbine
> > on the roof to pull the air much faster.  When the laser cutter has
> > significant negative pressure, you can not smell it even when standing
> > right over it.
> While the current exhaust scheme is quite ingenious, I hope it is just a
> temporary hack and we can do something more permanent in the near
> future.
> -andy
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20120315/c3397299/attachment-0003.html>

More information about the Noisebridge-discuss mailing list