[Noisebridge-discuss] The mill arrived, not ready for use
Mitch Altman
maltman23 at hotmail.com
Thu Apr 4 00:49:25 UTC 2013
Thanks, Jim, and everyone who helped!
> From: jim at systemateka.com
> To: noisebridge-discuss at lists.noisebridge.net
> Date: Tue, 2 Apr 2013 18:43:07 -0700
> Subject: [Noisebridge-discuss] The mill arrived, not ready for use
>
>
> The mill arrived this afternoon (thanks jarred,
> dante, dylan, curtis, and thanks to John at Highland
> Electronics, who donated the machine.
> The mill is in the dirty workshop on palettes
> beneath the sub-panel, two pieces and a box of parts.
> The mill must be mounted on some work surface
> and we must get some cutting oil and most especially
> some clamps to hold down "the work".
>
> For those who don't know but care, a mill is
> a cutting machine for sheet metal (mainly, and maybe
> other metal parts, depending on the cutting tools
> and the mill's design). Good machinists use mills
> properly and have all their fingers and thumbs.
>
>
>
>
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20130403/a905e358/attachment-0003.html>
More information about the Noisebridge-discuss
mailing list