[Noisebridge-discuss] Giant 3D Printer ... Let's get it built !!!!

Robert Chu robert.chu01 at gmail.com
Fri Sep 13 11:26:50 UTC 2013

It looks like the build platform could potentially print a two foot by two
foot cube. One of the original goals for it was to enable it to print
cos-play armor.

That would be awesome if you could do the design work. I would also ping
more people in the community to see if they would want to
support/contribute to this project as well and possibly print the designs.
>From my little knowledge of 3D printers, I am estimating that the total
service and material cost would be ~$300 or less...

Radiant Ambition Yields Change

On Thu, Sep 12, 2013 at 8:27 AM, Zachary Morriss <zmorriss at gmail.com> wrote:

> Tell me more... What's giant and is it just a frame (meaning we need to
> work out linear motion, steppers and controllers)? What's the geometry?
> Sounds like a really fun project, and I can model brackets in cad if need
> be, but my 3D printer is offline at the moment so someone else would have
> to print them at NB.
> On Thu, Sep 12, 2013 at 1:35 AM, Robert Chu <robert.chu01 at gmail.com>wrote:
>> Link donated a frame for a GIANT 3D printer, and what we need is to a 3D
>> developer to develop the parts for it and possible another person to print
>> the parts.
>> Let's get this going... Finally!!!
>> Cheers
>> --
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20130913/0bb343a0/attachment.html>

More information about the Noisebridge-discuss mailing list