[Noisebridge-discuss] OV7670 + Arduino Uno

[hol at gaskill.com]

 If this is your first project using I2C communication I recommend you
read up about how it is implemented on arduino - there are plenty of
examples on how to wire up the bus. I found this which should cover your
hardware http://forum.arduino.cc/index.php/topic,159557.0.html

good luck!
hol

On 2014-12-12 23:05, Justine De Caires wrote: 

> I'm fairly new at Arduino/electronics - I just want to get the OV7670 to work with my uno without having to use an arduCAM shield. The code isn't the confusing part - I literally just do not know how to get the camera onto the board. 
> 
> Any help would be (seriously) appreciated, since I can only find code (which I don't need) and schemata (which I can't figure out how to read) on the interwebs. 
> 
> Thanks. 
> 
> _______________________________________________
> Noisebridge-discuss mailing list
> Noisebridge-discuss at lists.noisebridge.net
> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss [1]
 

Links:
------
[1] https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.noisebridge.net/pipermail/noisebridge-discuss/attachments/20141215/e329e2d2/attachment-0003.html>