[Noisebridge-discuss] Instrument/Microphone Cable Making Workshop
John Adams
jna at retina.net
Fri Jan 17 00:12:09 UTC 2014
If you want to spend more money, buy Mogami cable instead of Canare. Mogami
is the studio-standard.
About $1.29/ft.
http://www.musiciansfriend.com/accessories/mogami-wg253400656-bulk-quad-mic-cable-black-sold-per-ft
-j
On Thu, Jan 16, 2014 at 4:10 PM, John Adams <jna at retina.net> wrote:
> I have made and repaired literally hundreds of these cables.
>
> Recommendations:
>
> Connectors:
>
> Neutrik XCC or XX series.
> http://www.neutrik.us/en-us/xlr/xcc-series/
> http://www.neutrik.us/en-us/xlr/xx-series/
>
> Cable: Canare Star-Quad
> http://www.canare.com/ProductItemDisplay.aspx?productItemID=53
>
> These parts are basically the audio industry standards.
>
> Tips: Make perfect solder joints. Never, ever make cables out of phase. +
> and - and ground are important, in the right order.
>
> I'm not going to attend, I've done this too much already.
>
> -j
>
>
>
> On Thu, Jan 16, 2014 at 2:39 PM, James Sundquist <sundquistjames at gmail.com
> > wrote:
>
>> Hey-o Discuss and Sound-Hacks,
>>
>> I have found a few people interested in an Instrument and/or Microphone
>> (XLR) cable making workshop. Cost for the materials will be split amongst
>> the participants so everyone gets the length of cable they want. Leftovers
>> will all be donated to Noisebridge and a cash donation will be encouraged.
>> There are a few requirements for this to be successful, but I have one
>> confirmed participant who can solder a perfect joint. Also, I can provide
>> a cable tester to guarantee we make something that actually works, but I
>> have no previous experience doing this.
>>
>> Anyone have previous experience successfully doing this?
>> Any tips to consider?
>> Any part recommendations?
>> Will you attend, assuming it is affordable?
>>
>> Once we figure out an actual cost, and enough people to pay for it, the
>> workshop will set a date and time. Very possibly I will attempt for a
>> Monday to overlap with Circuit Hacking (for the soldering intro).
>>
>> _______________________________________________
>> Noisebridge-discuss mailing list
>> Noisebridge-discuss at lists.noisebridge.net
>> https://www.noisebridge.net/mailman/listinfo/noisebridge-discuss
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.noisebridge.net/pipermail/noisebridge-discuss/attachments/20140116/15ee5754/attachment-0001.html>
More information about the Noisebridge-discuss
mailing list